Table of Contents
General Operation
Power ON/OFF
To switch on or off the TV ;
Press the Mains ON/OFF button.
The power of the TV is turned on or off complete-
ly. If no picture appears but the Standby and
Power indicator illuminates, press the Power
ON/OFF button of the remote control transmitter
as the TV set is in standby mode.
To set the TV to standby mode;
Press the Power ON/OFF button.
During Standby mode the Standby and Power
indicator illuminates more brightly.
TV/AV
TIMER
To turn on the TV from the standby mode,
press any of the following button.
Power ON/OFF button of the remote
control transmitter.
Programme UP/DOWN of the remote
control transmitter or the TV set.
1 to 9, 0 button on the remote control
transmitter.
Important !
Be sure to set the Mains ON/OFF switch to the
off position, if the power failure occurs while
viewing.
Auto Shut Off Function
This TV set incorporates the AUTO SHUT OFF
function. Even if the TV is left on after you have
gone to sleep, the TV set changes to the standby
mode within 10 minutes after all broadcasts have
ended.
8
P
P
-/--
OFF 0:10
Direct Programme Selection
Example
To select programme position 8;
8
Press "8" button.
8
To select programme position 27;
-/--
2
- -
Press the DIGIT button. Press "2"button. Press "7" button.
To select programme position 125;
-/--
-/--
- -
1- -
Press the DIGIT button twice. Press "2"button. Press "5"button.
To select programme position 255;
-/--
-/--
-/--
Press the DIGIT button 3 times. Press "5" button.
Press "5"button.
Programme Up and Down
Press the Programme UP (CH
select the next programme position.
Press the Programme DOWN (CH
button to select the previous programme position.
Channel Scanning
Press the CHANNEL SCAN button to search for
a programme. The channel positions are auto-
matically scanned, and the channel scanning will
stop at the position where it began. To stop at the
position you want, press this button again.
7
8
9
10
7
2 -
27
2
12-
5
2- -
25-
) button to
CH SCAN
11
5
125
5
255
)
Table of Contents
