Led Color And Biometric Reader Status - Hitachi PC-KCM50 User Manual

The indicator LED shows the status of the Biometric Reader. Depending on its color and

blinking state, please take an appropriate action. Note that Hitachi Finger Vein Biometric PKI

Middleware (hereafter called the Middleware) for Windows (C-N1900-11) or for Mac (C-

N1900-12) needs to be installed in the PC or Mac.

LED status

Biometric Reader status

Biometric Reader is not connected to

the PC or

Off

Biometric Reader is not recognized by

the Middleware.

Biometric Reader is connected to the

PC and is recognized by the

Orange

Middleware.

(SIM card is not inserted or

recognized.)

Biometric Reader is connected to the

Orange blink

PC and SIM card being is accessed.

Biometric Reader is connected to the

Blue

PC and SIM card is recognized.

Biometric Reader is to ready for use.

Biometric Reader is connected to the

Blue blink

PC and is waiting for a finger to be

(Slow)

placed for capture.

Blue blink

Biometric Reader is capturing finger

(Fast)

vein.

Biometric Reader is connected to the

Red

PC and finger vein authentication

failed.

Biometric Reader is connected to the

Red blink

PC and a device error occurred.

Note: On some PCs the LED doesn't extinguish when the PC enters SLEEP or POWER OFF

modes.

Action

Connect the Biometric Reader to

the PC. Install the Middleware.

If the Middleware is already

installed, disconnect the

Biometric Reader and a USB hub

(if any) from the PC and connect

them again.

Insert a supported SIM card into

the Biometric Reader.

Wait until the LED status

becomes Blue.

Do not disconnect the Biometric

Reader or remove the SIM card

unless the LED has not turned

blue after 1 minute.

If the Middleware is already

installed, disconnect the

Biometric Reader and a USB hub

(if any) from the PC and connect

them again.

-

Place your finger on the scanning

area of the Biometric Reader.

Place your finger until

authentication is finished.

Retry finger vein authentication.

Disconnect the Biometric Reader

and a USB hub (if any) from the

PC and connect them again.

5 / 20