NEC Express5800 Series User Manual page 47
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Chapter 2 Preparations
Installing the flash backup unit control board
Install the control board of the flash backup unit to the RAID controller while referring to the User's
Guide for the RAID controller.
Connecting the flash backup unit control cable
To connect the flash backup unit control cable into the battery pack, see the following figure. Check the
form of the connector and connect the cable straight into the connector.
Getting ready to install the battery
1.
See Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
To remove the side cover and the front bezel, see Chapter 2 (1.3 Removing the Side Cover and
1.4 Removing the Front Bezel).
Tips
The following diagram shows an example of N8103-176/177/178. The control
board part is installed to N8103-206/207/208 as standard.
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
47
Table of Contents
