Figure - Cisco UCS C220 M4 Maintaining The Server

Installing or Replacing Server Components

3

1

CPU retaining latch

2

CPU retaining latch

3

Hinged CPU cover plate

Step 7

Remove any existing CPU:

a.

With the latches and hinged CPU cover plate open, swing up the CPU in its hinged seat to the open

position, as shown in

Grasp the CPU by the finger grips on its plastic frame and lift it up and out of the hinged CPU seat.

b.

c.

Set the CPU aside on an anti-static surface.

Step 8

Install a new CPU:

a.

Grasp the new CPU by the finger grips on its plastic frame and align the tab on the frame that is

labeled "ALIGN" with the SLS mechanism, as shown in

b.

Insert the tab on the CPU frame into the seat until it stops and is held firmly.

The line below the word "ALIGN" should be level with the edge of the seat, as shown in

c.

Swing the hinged seat with the CPU down until the CPU frame clicks in place and holds flat in the

socket.

d.

Close the hinged CPU cover plate.

e.

Clip down the CPU retaining latch with the

with the

Cisco UCS C220 M4 Server Installation and Service Guide

3-34

CPU Socket

1

4

Figure

3-16.

icon. See

Figure

3-16.

Chapter 3

5

2

4

Hinged CPU seat

5

Finger grips on plastic CPU frame

Figure

3-17.

icon, and then clip down the CPU retaining latch

Maintaining the Server

Figure

3-17.

OL-32473-01