CLT-2422E-NEW
7/16/02
9:08 AM
BASICS
Using base speakerphone:
1.
Press SPEAKER.
2.
Dial the phone number.
The screen shows:
Call timer
3.
Press SPEAKER again to hang up.
Volume adjustment
The VOLUME keys on the handset adjusts the volume level of the
handset's earpiece. The VOLUME keys on the base controls the base
speaker. There are four levels.
Speakerphone volume
1.
Make sure the speakerphone is ON (SPEAKER key is lit).
Press VOLUME ▲ or ▼, on the base. The volume level shows on
2.
screen.
Handset volume
1.
Make sure the handset is in TALK mode.
Press the VOLUME ▲ or ▼ key on the side of the handset.
2.
The volume level shows on screen.
Page 14
Telephone number
Volume level
14
BASICS
Ringer switch and volume
Handset ringer:
The RINGER switch must be on for the handset to ring during
incoming calls.
Base ringer:
1.
Make sure the speakerphone is OFF (SPEAKER key is not lit).
2.
To increase the ringer volume to the highest level, press
VOLUME ▲ .
To decrease the ringer volume level, press VOLUME ▼.
3.
To turn off the ringer, press VOLUME ▼ until R R I I N N G G E E R R O O F F F F
4.
shows on screen.
10: 04 AM
RINGER OFF
Speakerphone use
For best speakerphone performance, avoid the following:
•
Areas with high background noise. (The microphone might pick
up these sounds and prevent the speakerphone from going into
the receiving mode when you finish talking.)
•
Surfaces affected by vibration.
•
Recessed areas such as in a corner, under a cupboard, or next to a
cabinet, which can generate an echo effect.
Tips:
•
The speakerphone works similar to a 2-way radio. You can only
listen or talk one at a time.
•
Stay reasonably close to the phone so you can be heard clearly.
•
The SPEAKER key lights up when the speakerphone is in use.
15
TIME