Related Manuals for Sailor S6000 series
Summary of Contents for Sailor S6000 series
- Page 1 SAILOR 6300B MF/HF Service Interface User Manual Document number: 97-147768-A Release Date: 31 August 2015...
- Page 2 97-147768-A SAILOR 6300B MF/HF Service Interface User Manual Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane A/S. The information in this manual is provided for information purposes only, is subject to change without notice and may contain errors or inaccuracies.
-
Page 3: Table Of Contents
97-147768-A SAILOR 6300B MF/HF Service Interface User Manual Table of contents Introduction ........................4 Precautions using the service tool ................... 4 Connecting to the service tool ................... 4 Connecting to the service without a network ................4 Connecting to the service tool through a network..............4 Overview of functionality .................... -
Page 4: Introduction
97-147768-A SAILOR 6300B MF/HF Service Interface User Manual 1 Introduction The service tool for the S6000 radio series MF/HF devices is made available by a built-in web server in the radio. The service tool can be accessed from a computer connected to a LAN shared with the device and is displayed in an internet browser with no additional installation of software required. - Page 5 97-147768-A SAILOR 6300B MF/HF Service Interface User Manual Figure 1: TMA tool page for the radio displaying IP address, etc.
-
Page 6: Overview Of Functionality
97-147768-A SAILOR 6300B MF/HF Service Interface User Manual 3 Overview of functionality The service tool is used to perform updates to the firmware and various settings of the radio. This section describes each feature of the service tool in turn. The tool will show information about firmware, status of the radio and data from the logs for all users without administrator rights, covered in section 3.1. - Page 7 97-147768-A SAILOR 6300B MF/HF Service Interface User Manual If the main board of the radio is replaced, a new serial number can be applied in the Current serial field. When no serial number is programmed, the ‘current serial’ field will display a 10-digit tracking number.
-
Page 8: Logs
97-147768-A SAILOR 6300B MF/HF Service Interface User Manual 3.1.2 LOGS The LOGS tab can be seen in Figure 3 below. Figure 3: LOGS tab. This tab includes four side-bar buttons, where each displays the respective logs over Received Distress Calls, Received DSC Calls, Transmitted DSC Calls and one button for the System Log. -
Page 9: Protected Access Functionality
97-147768-A SAILOR 6300B MF/HF Service Interface User Manual 3.2 Protected access functionality Protected administrator access to the service tool is obtained by logging in using the button in the upper right corner of the service tool (see Figure 5 below). -
Page 10: Channels
97-147768-A SAILOR 6300B MF/HF Service Interface User Manual 3.2.1 CHANNELS An example of the CHANNELS tab can be seen in Figure 7 below. Figure 7: CHANNELS tab. This tab has a side-bar button for various ITU channel bands and for private channels. - Page 11 97-147768-A SAILOR 6300B MF/HF Service Interface User Manual Figure 8: Configuration of Channel 241. Channel settings Description Allowed? Select this tag to show the channel in the channel table and make it available via the control unit. Remove the tag to remove the channel from the channel table and from the control unit.
-
Page 12: Config
Note: Wrong selection may damage the ATU. PSU Monitor enabled If the radio’s power supply is a SAILOR 6081 you can enable the Power Supply Monitor in the radio. Primary station Select this tag if you want this radio to have priority over a... - Page 13 The service tool will automatically add the figure shifts, letter shifts, spaces and the letter ‘x’ where appropriate. It is strongly recommended to check the telex settings on the SAILOR 6006 Message Terminal (Telex) when the settings above have been modified and the radio has been power cycled.
- Page 14 97-147768-A SAILOR 6300B MF/HF Service Interface User Manual Figure 10: CONFIG tab – Configuration side-bar page continued. Options Description Enter code to enable telex Enter the option code to enable telex. After entering, the option can be removed again by de-checking the check box...
- Page 15 97-147768-A SAILOR 6300B MF/HF Service Interface User Manual *) As for telex, the user must enter the code delivered with the system to enable D6. The field D6 option in Figure 10 above depicts how the field appears when the activation code has already been entered to the field.
- Page 16 97-147768-A SAILOR 6300B MF/HF Service Interface User Manual Figure 11: CONFIG tab – Watch Keeping Receiver side-bar button. On the Watch Keeping Receiver page it is possible to program 6 DSC frequencies into the watch receiver or disable frequencies. These custom frequencies will also be available for routine DSC transmissions.
-
Page 17: Tools
97-147768-A SAILOR 6300B MF/HF Service Interface User Manual 3.2.3 TOOLS Figure 12: TOOLS tab. • The FW Update button lets the operator upload new firmware to the radio. Only files issued by Cobham shall be used in the .tiif format.