Setting Up the Printer Driver Installing the Driver Hardware Requirements Software Requirements Install Procedure Notes: I do not have a CD-ROM driver 2.13 ETTING RINTER...
Setting Up the Printer Driver Installing the Printer Software from the CD-ROM If the CD-ROM drive does not automatically run: Start x:\cdsetup.exe Notes: Cancel Install the Samsung Software-I on your PC 2.14 ETTING RINTER...
Notes: To Install Shared Win 95/98 Printer Driver from NT Server to Client PC Sharing Windows 95 D:\7300\XX\pcl\pcl6\win9x Uninstalling the Printer Driver Start Programs Driver uninstall Properties Alternate Drivers Samsung ML-7300 Setting Up the Printer Driver Samsung ML-7300 ETTING RINTER 2.15...
Page 33
Setting Up the Printer Driver Installing the Font Navigator (FontNav) If the CD-ROM drive does not automatically run: Start x:\cdsetup.exe Notes: Cancel Install the Bonus Software on your PC 2.16 ETTING RINTER...
Operator Panel Buttons Using Panel Buttons Operator Panel Menus Changes made from a software application override the user default settings made from the printer operator panel. SING PERATOR ANEL...
Changing Printer Setting The ‘OFFLINE’ message appears on the display and the printer is off-line. An asterisk( ) appears beside the current user default setting for that menu item. SING PERATOR ANEL...
Page 60
Upgrading the Firmware in a Unix Environment • Firmware upgrading requires Tftp protocol. Check whether Tftp daemon is installed in advance. • Setting IP Address Assignment Method to DHCP is recommended in order to execute Firmware upgrading. NETWORK MENU 3.25 SING PERATOR ANEL...
Page 61
NETWORK MENU Upgrading the Firmware in Abnormal Cases 3.26 SING PERATOR ANEL...
Page 62
After the ”Completed. Network Card will start about 30secs later” message is displayed on SyncThru, click OK. It may take a few seconds to write the new file to Firmware. Normally 30 seconds is sufficient. NETWORK MENU 3.27 SING PERATOR ANEL...
Loading Paper Envelopes Printing information Envelopes guidelines Loading envelopes RINT EDIA...
Page 69
Loading Paper Notes: Do not use an envelope curled down side, refer to the figure. RINT EDIA...
Page 70
Loading Paper Label Label guidelines Notes: Do not print on both sides of labels. Label orientation RINT EDIA...
Page 71
Loading Paper Transparencies Transparencies guidelines Transparencies orientation Notes: Because transparencies are heavier than paper, do not load the trays to capacity. Remove each transparency from the output bin before • printing another. RINT EDIA...
Using Features in the Printer Driver With Windows 95/98/NT 4.0/2000 Start-Settings-Printers Printer-Properties General Notes: Changes made from a software application override the user default setting made from the printer operator panel. Sharing Details RINTING ASKS...
Using the Printer Driver ten tabs Paper Tab RINTING ASKS...
Page 76
Copies Paper Orientation Different Soruce for First Page Notes: Paper Source Paper sizes Paper type Important If you want to know more about each menu, click on the Help button. The help screen gives detailed information about each menu. Using the Printer Driver ...
Using the Printer Driver Graphic Tab RINTING ASKS...
Page 78
Resolution SRT Mode Notes: Toner Save Mode Graphic Mode Halftoning Important If you want to know more about each menu, click on the Help button. The help screen gives detailed information about each menu. Using the Printer Driver SRT Mode is disabled when 1200 dpi settings are selected.
Using the Printer Driver Output Tab RINTING ASKS...
Page 80
Using the Printer Driver Pages per Sheet(Multiple Images) Duplex Important If you want to know more about each menu, click on the Help button. The help screen gives detailed information about each menu. RINTING ASKS...
Using the Printer Driver Printer Tab Printer Memory Important If you want to know more about each menu, click on the Help button. The help screen gives detailed information about each menu. RINTING ASKS...
Using the Printer Driver Overlay Tab overlay RINTING ASKS...
Page 83
Using the Printer Driver Important If you want to know more about each menu, click on the Help button. The help screen gives detailed information about each menu. 5.10 RINTING ASKS Overlay List Create Overlay Load Overlay Overlay List Overlay List...
Using the Printer Driver Watermark Tab 5.11 RINTING ASKS...
Page 85
Using the Printer Driver Message Edit Important: If you want to know more about each menu, click on the Help button. The help screen gives detailed information about each menu. 5.12 RINTING ASKS...
Printing Both Sides of Paper Notes: Do not print on both sides of labels, transparencies, envelopes, or paper heavier than 24lb. Damage to printer and paper jamming might result. • For duplex printing, it is recommended to print less than 1,500 pages a day to keep a good image quiality.
Printing Both Sides of Paper Menu Setting READY Result: The ‘OFFLINE’ message appears on the display and the printer is off-line. Result: An asterisk setting for that menu item. Notes: Settings in the printer driver and software application override operator panel settings. 5.14 RINTING ASKS...
Printing Both Sides of Paper Paper Orientation for Printing both sides of Paper For Multi-Purpose tray For all other Trays 5.15 RINTING ASKS...
Page 89
rinting Multiple Pages on One Sheet of Paper ¤ ¤ ¤ ¤ 5.16 RINTING ASKS (N-Up Printing) Paper Output Side Type Pages per Sheet Print Page Borders Pages per Sheet Multiple Pages per Print Page Borders...
Toner Cartridge Toner cartridge storage Toner cartridge life Distributing the Toner Notes: To prevent damage to toner cartridge, do not expose it to light. DENSITY ECONO AINTAINING RINTER...
Toner Cartridge Redistributing Toner CAUTIONS: • Avoid reaching too far into the printer. The fusing area may be hot. • To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. AINTAINING RINTER...
Page 98
Notes: If the toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. If the print remains light Toner Cartridge AINTAINING RINTER...
Cleaning the Printer To clean your printer, proceed as follows. AINTAINING RINTER...
Page 100
Notes: While cleaning the printer, be careful not to touch the transfer roller(the black, rubber roller, located underneath the toner cartridge). Skin oils on the roller can cause print quality problems. Cleaning the Printer AINTAINING RINTER...
Cleaning LSU Notes: For more information on using method, see attached label on the inside of the top cover. AINTAINING RINTER LSU(Laser Scanning Unit)
Clearing Paper Jams Be very careful not to tear the paper, when clearing paper jams. If a small piece of paper is left in the printer, it could cause additional jams. Paper Jam Locations ROBLEM OLVING...
Page 105
Clearing Paper Jams ROBLEM OLVING If the edge of the paper is visible in the feed area, slowly pull the paper down and out of the printer.
Page 106
Clearing Paper Jams The paper jam locations for both sides printing are different from those of normal printing. Refer to page 7.1. ROBLEM OLVING...
Installing Software Installing the PS Driver ’ ACINTOSH UIDE...
Page 124
If the computer is connected to a network, Printer Port will disconnect selecting communication with the network. If you select LocalTalk, the Samsung ML-7300 printer appears in the Chooser box. Installing Software ’ ACINTOSH UIDE...
Page 125
Installing Software ’ ACINTOSH UIDE These steps appear with some driver versions. If Auto Setup fails, click ‘Select PPD’ and choose Samsung ML-7300 file. Keep the original CD-ROM in a safe place.
Printing with a Macintosh The Page Setup Dialog Box The Page Setup dialog box may differ depending on the application and LaserWriter version you are using. ’ ACINTOSH UIDE...
Page 128
Printing with a Macintosh ’ ACINTOSH UIDE...
Printing with a Macintosh The Print Dialog Box The Page Setup dialog box may differ depending on the application and LaserWriter version you are using. ’ ACINTOSH UIDE...
Page 130
Printing with a Macintosh ’ ACINTOSH UIDE...
Installing PS Driver You must have the CD(or diskette) for “windows 95” or Windows 98” available for use. You cannot use PS in Windows 3.1. SING INDOWS CRIPT RIVER...
Page 133
Installing PS Driver SING INDOWS CRIPT RIVER...
Page 134
Installing PS Driver SING INDOWS CRIPT RIVER...
Printer Memory Notes: DRAM SIMM Features for Upgrade Notes: CN 4: This slot recognizes only half of 8MB, 32MB and 128MB SIMMs if they are installed. RINTER PTIONS...
Serial/LocalTalk Connecting the LocalTalk Cable A LocalTalk cable is not included. It must be purchased separately. Please contact your Macintosh dealer. F.14 RINTER PTION...
Page 158
Serial/IrDA Connecting the Infrared Apapter The green light on the infrared adapter comes on when the printer is plugged in. F.15 RINTER PTION...
Page 159
Serial/IrDA Using the Infrared Apapter F.16 RINTER PTION...
Page 161
Optional Tray 2 Loading the plain Paper into the Optional Tray 2 To load the envelope into the tray, lift the lever on the left side of the tray. F.18 RINTER PTION...
Page 163
Optional Tray 2 Do not fold or crease the paper. This mark indicates the height of paper loaded. The printer may pull paper from tray 1 first. To change this, see ‘Paper Source Selection’ on page F.22. F.20 RINTER PTION...
Page 164
Optional Tray 2 Loading the envelopes into the Optional Tray 2 F.21 RINTER PTION...