Wireless Lan Setup - Sharp MX-3070N Handy Manual

SHARP

For MX-3070/3570/4070N series, two connection methods are available for Wireless LAN:-

Infrastructure Mode:

Infrastructure mode allows for wireless communication between two client devices via a host (access point).

The MFP connects to an access point to obtain an IP address.

Simultaneous usage of Infrastructure mode and wired connection is prohibited.

Access Point Mode:

Access Point (Ad-Hoc) mode allows for direct wireless communication between two client devices. Wireless

devices acquire an IP address from the MFP directly, allowing Print/Scan features to be available from mobile

devices.

Simultaneous usage of Access Point mode and wired connection is allowed however, mobile devices will not

be able to connect to the intranet/internet when connected to the MFP Wireless LAN.

Wireless LAN Support:

For Wireless LAN specification information, please refer to the Machine Specification section [Wireless LAN]

within this guide.

Wireless LAN Supported Connections:

Type Wired LAN

Infrastructure Mode



1

2

X



3

MFP Functionality - Access Point Mode:

Viewing of the MFP webpage (HTTP/HTTPS).

Printing (LPD / Raw / IPP / IPP-SSL / FTP push).

Scanning (Scan to FTP / SMB).

Remote Operation Panel.

Access to the SMB server.

mDNS communication.

Wireless LAN

Wireless LAN

Access Point Mode

X



X

Connections are only available using the

X

conventional wired LAN connection.

Connections are only available using

X

Infrastructure Mode [Wireless LAN].

Connections are available either using wired

LAN or Access Point Mode [Wireless LAN].



When only Access Point Mode is required

and no wired LAN is used, please select this

connection type.

Description

25