Table of Contents
Controls, LEDs, and Connectors
3.3.3.4
Serial Port Connector (COM1/J1)
There is one front access asynchronous serial port interface (SP0) that is routed to the
mini DB-9 front-panel connector. You can use the Emerson part SERIAL-MINI-D2 to convert to
a DB9 male connector. The pin assignments for these connectors are as follows:
Table 3-12 COM1 Port Connector Pin Assignments
Pin
1
2
3
4
5
6
7
8
9
3.3.3.5
USB Connector (J2)
There is one USB Type A connector located on the MVME7100 front panel. The pin assignments
are as follows:
Table 3-13 USB Connector (J2) Pin Assignments
Pin
1
2
3
4
64
Signal
No connect
RX
TX
No Connect
GND
No Connect
RTS
CTS
No Connect
Signal
USB_VBUS (+5.0V)
USB_DATA-
USB_DATA+
GND
MVME7100 Single Board Computer Installation and Use (6806800E08C)
Table of Contents
