Card Reader Board - HP Pavilion 15 Maintenance And Service Manual

Description

Card reader board

Card reader board cable

Before removing the card reader board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see

5.

Remove the battery (see

Remove the card reader board:

1.

Disconnect the cable from the ZIF connector on the card reader board (1).

2.

Remove the Phillips M2.0×4.0 screw (2) that secures the board to the computer.

3.

Remove the board from the computer (3).

Reverse this procedure to install the card reader board.

Bottom cover on page

Battery on page

31).

29).

Component replacement procedures

Spare part number

L23990-001

L23891-001

49