Operation - Husqvarna 545RXT AutoTune Operator's Manual

10. Adjust the shoulder strap to make the product weigh

equally on your shoulders.

Introduction

WARNING: Before you operate the product,

you must read and understand the safety

chapter.

Before you operate the product

•

Examine the work area to make sure that you know

the type of terrain, the slope of the ground and if

there are obstacles such as stones, branches and

ditches.

•

Do an overhaul inspection of the product.

•

Do the safety inspections, maintenance and

servicing that are given in this manual.

•

Make sure that all covers, guards, handles and the

cutting equipment are correctly attached and not

damaged.

•

Make sure that there are no cracks at the bottom of

the saw blade or grass blade teeth or by the center

hole of the blade. Replace the blade if it is damaged.

14

11. Adjust the side straps around the rib cage until the

breastplate is aligned with the center of your chest.

12. Adjust the height of the suspension point, see

Product overview on page 2 . For forestry clearing,

the correct height of the suspension is approximately

10 cm below your hip bone.

•

Examine the support flange for cracks. Replace the

support flange if it is damaged.

•

Make sure that the locknut can not be removed by

hand. If you can remove it by hand, it does not lock

the cutting attachment sufficiently and you must

replace it.

•

Examine the blade guard for damages or cracks.

Replace the blade guard if it has been hit or if it has

cracks.

•

Examine the trimmer head and cutting attachment

guard for damages or cracks. Replace the trimmer

171 - 001 - 20.10.2017