Quick Links
See also:
User Manual
Side
B
Side
A
JAPANESE
This manual contains text, diagrams and explanations which will guide the reader in the correct installation,
safe use and operation of the FX
understood before attempting to install or use the unit. Further information can be found in the associated
manuals mentioned below.
Specifications are subject to change without notice
Safety guidelines for the user and protection of the FX
This manual has been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows:
a) Any engineer using the product associated with this manual, should be of a competent nature,
trained and qualified to the local and national standards. These engineers should be fully aware of
all aspects of safety with regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the
local and national standards.
c) All operators of the completed equipment should be trained to use this product in a safe and
coordinated manner in compliance to established safety practices.
Note: The term 'completed equipment' refers to a third party constructed device which contains or uses the
product associated with this manual.
Notes on the Symbols Used in this Manual
At various times throughout this manual certain symbols will be used to highlight points of information which
are intended to ensure the users personal safety and protect the integrity of equipment.
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property damage.
•
Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage
that may arise as a result of the installation or use of this equipment.
•
All examples and diagrams shown in this manual are intended only as an aid to understanding the text,
not to guarantee operation. Mitsubishi Electric will accept no responsibility for the actual use of the
product based on these illustrative examples.
•
Please contact a Mitsubishi distributor for more information concerning applications in life critical
situations or high reliability.
Associated Manuals
PROGRAMMING MANUAL, PROGRAMMING MANUAL ΙΙ, or FX COMMUNICATION USER'S MANUAL
mentioned below are not provided in sets with a product.
Contact our agent where the product was purchased to request the manuals accordingly.
Manual Name
This
FX
-485ADP INSTALLATION
0N
manual
MANUAL
FX COMMUNICATION USER'S
#
MANUAL
✩
FX
HARDWARE MANUAL
1S
✩
FX
/FX
HARDWARE MANUAL
0
0N
✩
FX
HARDWARE MANUAL
1N
✩
FX
HARDWARE MANUAL
2N
FX
HARDWARE MANUAL(DSS/DS)
2NC
✩
✩
PROGRAMMING MANUAL
✩
PROGRAMMING MANUAL ΙΙ
FX
-CNV-BD
✩
1N
Special Adapter Connection Board
FX
-CNV-BD
✩
2N
Special Adapter Connection Board
# Indispensable manual
This manual describes the installation the and specifications of the 485ADP .
For details on wiring (including use of terminal resistor and preparation of cable) with communication equipment,
system configuration and communication setting, and program examples, refer to the "FX COMMUNICATION USER'S
MANUAL".
Side
B
ENGLISH
-485ADP (hereafter abbreviated to "485ADP") and should be read and
0N
Manual
Number
JY992D53101
JY992D69901
JY992D83901
JY992D47501
JY992D89301
JY992D66301
JY992D76401
(D/UL)
JY992D87201
JY992D76401
JY992D88101
JY992D84701
JY992D63601
✩ Either manual is necessary.
FX
-485ADP
0N
Installation Manual
JY992D53101D
0N
Description
Describes contents related to installation of the
FX
-485ADP Module.
0N
Describes contents related to communication
available in FX Series PLC such as wiring,
communication setting, and program examples.
Describes contents related to hardware of FX
Series PLC such as specifications, wiring, and
installation.
Describes contents related to instruction in FX
FX
/FX
/FX/FX
/FX
0S
0N
2
2C
Describes contents related to instruction in FX
FX
/FX
/FX
Series PLC.
1N
2N
2NC
Describes contents related to installation of the
each board.
-485ADP.
0
Series PLC.
1S
/
/
Related Manuals for Mitsubishi FX0N-485ADP
Summary of Contents for Mitsubishi FX0N-485ADP
- Page 1 All examples and diagrams shown in this manual are intended only as an aid to understanding the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for the actual use of the product based on these illustrative examples.
- Page 2 First Serial communication without protocol between PLC V1.20 V1.06 communication product product and equipment via RS-485 interface. Inverter Controlling Mitsubishi's FREQROL inverter using — — V3.00 V3.00 communication EXTR instruction in function expansion memory. 3. Installation Caution • Use in the environments specified under the general specification in the manual.
- Page 3 Manual number : JY997D53101 Manual revision : D Date : September 2003 HEAD OFFICE : MITSUBISHI DENKI BLDG MARUNOUTI TOKYO 100-8310 HIMEJI WORKS : 840, CHIYODA CHO, HIMEJI, JAPAN...
- Page 4 3) Install the following board to the port on the main unit. The terminal configuration of the RS-485 port on the 485ADP is as shown below. not to guarantee operation. Mitsubishi Electric will accept no responsibility for the actual use of the Board name Corresponding model product based on these illustrative examples.