Canon VB-S30D MKII Installation Manual
Hide thumbs
Also See for VB-S30D MKII:
- Operating manual (185 pages) ,
- Operation manual (172 pages) ,
- Specifications (2 pages)
Quick Links
See also:
Operating Manual
BIE-7202-000
ENGLISH
Network Camera
/
/
/
Installation Guide
Please be sure to read the "Safety Precautions" section for
correct use. After reading this Installation Guide, keep it in a
readily accessible location for future reference. This camera
is for indoor use only.
* Some cameras are not available in certain countries or regions.
WARNING
To reduce a risk of fi re or electric shock, do
not expose this product to rain or moisture.
Caution
Request a professional installer for all installation
work. Never try to install the camera yourself.
Doing so may result in unforeseen accidents
such as dropping the camera or electric shock.
Check Included Items
Camera
Template
Installation Guide (This document)
Safety Wire, Screws (M4) x 1
Warranty Card
Symbols Indicating Camera Model
: VB-S30D Mk II
: VB-S31D Mk II
: VB-S800D Mk II/VB-S805D Mk II
© CANON INC. 2017
Printed in Taiwan
Part Names
1
2
3
FRONT
9
Serial_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
MAC_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1. Camera Head / 2. Top Cover / 3. Memory Card Slot Cover /
4. Audio Input Terminal / 5. External Device I/O Terminal /
6. 100Base-TX LAN Connector / 7. Safety Wire Attachment /
8. Tripod Mounting Screw Hole (a 1/4-20 UNC tripod mounting
screw less than 5.5 mm (0.22 in.) in length will fi t the screw
hole) / 9. Rotation Dial
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
Installing the Camera
1
a
Ceiling Installation
FRONT
Wall Installation
a. Template
2
41 x 50 mm (1.61 x 1.97 in.)
4
5
6
If Using a Memory Card
7
8
b
c
b. Memory Card Slot
c. Reset Switch (please refer to the "Operation Guide")
To remove the memory card, push it in all the way until the card
slightly pops out and remove.
Important
Insert a memory card before installing the camera.
3
e
d
a
d. Anchor or Structure / e. Safety Wire
4
f
Please refer to the reverse side
of this guide for details.
g
LED
: When powered on, during reboot, during normal use
: When [Turn Off] is selected (please refer to the
"Operation Guide")
f. LAN cable / g. LED
Important
The camera head will move and make noise when the power is
turned on.
• Do not touch the camera head.
• After the head stops moving, mount the camera.
If Using the External Device Terminal or Audio Terminal
h
i
j
k
Please refer to the reverse side
of this guide for details.
h. Protective Cover for Audio Input Terminal
i. Audio Input Terminal
j. Protective Cover for External Device I/O Terminal
k. External Device I/O Terminal
5
6
Weight:
Approx. 270 g (9.6 oz.)
Approx. 270 g (9.6 oz.)
Approx. 240 g (8.5 oz.)
7
8
Accessories
The following accessories can be purchased separately as
necessary. Some accessories are not available in certain
countries or regions.
Pendant Mounting Kit PC30-VB
Dedicated accessory used to install the camera to the end of
pipe that extends from high ceilings, such as in big-box stores.
Surface Mounting Spacer SS30-VB
Dedicated accessory used to install a camera without having to
drill any holes in the wall or ceiling for cables.
Junction Box Mounting Kit PS30-VB
Dedicated accessory used to install a camera using a junction
box.
Plenum Mounting Kit SR30-P-VB
Dedicated accessory used to install the camera recessed into a
ceiling. The part projecting out within the ceiling can be covered.
The contents of this guide are subject to change without any prior
notice.
Related Manuals for Canon VB-S30D MKII
Summary of Contents for Canon VB-S30D MKII
-
Page 1: Installation Guide
Symbols Indicating Camera Model : VB-S30D Mk II : VB-S31D Mk II : VB-S800D Mk II/VB-S805D Mk II © CANON INC. 2017 Printed in Taiwan : When powered on, during reboot, during normal use Part Names : When [Turn Off] is selected (please refer to the “Operation Guide”) -
Page 2: Installation Precautions
• Be sure to use installation screws designed for the type of Canon will assume no liability for any accident or damage Please refer to the “Specifications” for specifications not listed below. • Some PoE devices have total consumption power limits for ports, surface the camera is to be installed.