/
7.
Press the
button once to transmit the function setting information. 2 short beeps will be
emitted from the indoor unit when the signal is received correctly. If wrong code is set, no
beep sound will be emitted.
NOTE: Press
/
button within 30 seconds after pressing MODE button.
For the function details, refer to Chapter 14-6.
8.
Exit the function setting mode by pressing the RESET button.
Setting up each indoor unit
Repeat step from 1. to 8. to set up each indoor unit. If the custom code is other than " ", steps
from 1. to 2. and 8. need to be performed.
2 short beeps
"Function details"
RESET
- 210 -
on page 241.