LG HBS-800 Quick Start Manual

Easy Pairing

- With the power off, slide the power switch

to the ON position.

- When the headset enters pairing mode, the

LED indicator will show a solid blue light.

(Speech: Ready to pair)

- Using your phone, find the

and search for new devices.

- Select LG HBS800 from the list of devices

and pair it with your phone.

- If you are asked for the Password/PIN code during the pairing

procedure, please enter 0000 (4 Zeros).

- Once pairing has completed successfully, you will hear a beep. (Speech:

Your headset paired)

- After pairing successfully, be sure to "Connect" to the LG HBS-800.

(Speech: Connected)

- Some phones will ask for permission to access the phones contact list.

If you would like to use Name Alert Function, please select OK or Allow

Access.

Advanced Multipoint

The HBS-800 is capable of having two devices connected to the headset at the same time.

This will give you the freedom of using call waiting between calls on both of your connected

phones.

Connection

- Pair the headset with one of your Bluetooth -enabled phones.

- Turn the headset off.

- With the power off, press the CALL button and slide the power switch to the ON position

at the same time for 2 seconds to enter Manual Pairing mode.

- Pair and connect the headset with your other Bluetooth -enabled phone. (This will be your

primary phone).

- Once this phone is paired and connected, go back and connect the originally paired phone

to the headset. This will now be your secondary phone.

Note: When the HBS-800 is connected to two phones at the same time(Multipoint), the

phone calling functions will work with the primary phone.

Note: In case of failure to connect to the primary phone through Easy Pairing, the HBS-800

will enter pairing mode.

Calling function

- Voice Dialing and Last Number Redial features work with the primary phone (or handset

which made the last outgoing call).

Call waiting

- While speaking on an active call, press and hold the CALL button for 1 second to switch

to an incoming call.

- To switch between 2 active calls, press and hold the CALL button for 1 second.

- To end both calls briefly press the CALL button.

- If both phones are receiving an incoming call, the headset will default to the primary device.

Parts Description

Memory Flex Neck Strap

ANC Switch

REWIND Button

FAST FORWARD Button

PLAY / PAUSE / STOP Button

Earbud (R)

Calling

Answer a Call

- When there is an incoming call, the headset will ring and vibrate. Briefly

press the VOLUME DOWN button to stop vibration. Briefly press the

CALL button to answer the incoming call.

Make a Call (Last Number Redial)

- Press and hold the CALL button for one second.

Make a Call (Voice Dial)

- Briefly press the CALL button to activate your handset's voice command menu.

End a Call

- Briefly press the CALL button.

Call Waiting

- Press and hold the CALL button for one second.

Call Reject

- Press and hold the CALL button for one second when the headset rings.

(Speech: Call Rejected)

Mic Mute

- Press and hold the VOLUME UP and VOLUME DOWN buttons at the

same time for 1 second to mute/unmute the Mic during conversation.

HBS-800

QUICK START

GUIDE

Menu

Charging Port

LED Indicator

Power Switch

Rev 3.0 US

Microphone

VOLUME UP Button

VOLUME DOWN Button

CALL Button

Earbud (L)