Wiring up
3.1
Wiring and block diagram
This section includes the block diagram of the AI 4xU/I 2-wire ST module with the terminal
assignments.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
You can use and combine the different wiring options for all channels.
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
14
Analog Input Module AI 4xU/I 2-wire ST (6ES7134-6HD01-0BA1)
3
Manual, 12/2017, A5E03572832-AD