Power is failed during sending/receiving.
board>
Memory over during reception.
Print is not made during reception in acting reception inhibit.
The send data length of one page exceeds the limit (2m) in sending.
The receive data length of one page exceeds the limit.
Speaking before data transmission
A document jam occurs in direct sending.
The FAX signal from the remote party is not detected within T1 time.
(When in recall, however, the recall setting in case of a
communication error is valid.)
A decode error occurs in the FAX board.
OK
Normal end of communication
OK in Internet FAX send with reception confirmation.
The called side does not have polling function in polling reception.
The called side has no data to send.
In polling reception, DCN is received for DTC.
In polling sending, there is no send data.
In poling sending, the allow number is not matched.
In polling sending, the system number is not matched.
In confidential sending, the remote party does not have confidential function.
(Including other company's machines)
1) The NSF signal has not "Confidential function" bit.
2) The NSF is not a Sharp machine.
In confidential reception, a confidential box number which is not registered is
specified.
In relay command sending, the remote machine has no relay function.
(Including other company's machine)
1) The NSF signal has not "Confidential function" bit.
2) The NSF is not a Sharp machine.
1) In relay command sending, DCN is received for NSS.
2) In relay command reception, a remote station number which is not
registered is specified.
3) In F code relay broadcasting, an F code relay command is
received.
In relay command reception, the relay ID does not match.
Communication Interruption Content
SHARP