Table of Contents
INSTALLATION (CONTINUED)
1.2.3 - Fitting rear levelling feet
Note: 2 people may be required for this operation
A set of adjustable back feet is provided with the kit. These parts are usually needed only in the case of a particularly
uneven floor and when height adjustments in phase 1.2.1 proved unsuccessfull.
•
Temporarily remove the screws (A) holding the
evaporator tray.
•
Temporarily remove screw (B)
•
Pre-assemble the two nuts to bottom of the foot.
•
While one operator is lifting the appliance the
other can assemble the foot with the 2 bolts (D)
and screw (E).
•
Repeat the process for the other side.
A
D
C
E
7
B
Hide quick links:
Table of Contents
