6.4 RECORDS
The event records menu shows the contextual data associated with up to the last 1024 events, listed in chronological order
from most recent to oldest. If all 1024 event records have been filled, the oldest record will be removed as a new record is
added. Each event record shows the event identifier/sequence number, cause, and date/time stamp associated with the
event trigger. Refer to the
PATH: ACTUAL VALUES
OSCILLOGRAPHY
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The
value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillog-
CYCLES PER RECORD
raphy section of chapter 5 for additional details.
A trigger can be forced here at any time by setting "Yes" to the
menu for information on clearing the oscillography records.
CLEAR RECORDS
6
PATH: ACTUAL VALUES
DATA LOGGER
The
OLDEST SAMPLE TIME
gets full, at which time it will start counting at the defined sampling rate. The
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the
COMMANDS
6-26
COMMANDS
CLEAR RECORDS
RECORDS
OSCILLOGRAPHY
FORCE TRIGGER?
No
NUMBER OF TRIGGERS:
MESSAGE
0
AVAILABLE RECORDS:
MESSAGE
0
CYCLES PER RECORD:
MESSAGE
0
LAST CLEARED DATE:
MESSAGE
2000/07/14
RECORDS
DATA LOGGER
OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
MESSAGE
2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It will be static until the log
menu for clearing data logger records.
CLEAR RECORDS
M60 Motor Protection System
menu for clearing event records.
Range: No, Yes
15:40:16
command. Refer to the
FORCE TRIGGER?
NEWEST SAMPLE TIME
6 ACTUAL VALUES
6.4.5 OSCILLOGRAPHY
COMMANDS
6.4.6 DATA LOGGER
represents the time the
GE Multilin