Connections; Plc Port - ABB CP650-x Operating Instructions Manual

Connections of the Control Panel

1

Power

2

Aux port

The PLC port is used to communicate with the PLC or with another type of controller.

Different electrical standards are available for the signals in the PLC port connector: RS-232, RS-422,

RS-485. The used cable selects the appropriate signals.

It is always necessary to use the correct cable type to connect on the PLC.

If the proper cable is not used, communication with the PLC will not be possible.

NOTE

The connector is a DB-9 pin female.

Pin

Description

1

GND

2

3

TX/CHA-

Operating Instructions

3

PLC port

4

PC/printer port

Pin

Description

4

RX/CHB-

5

6

+5 V output

14

5

Ethernet port

6

USB port for

Pin

Description

7

CTS/CHB+

8

RTS/CHA+

9

CP600/Issue: 12.2011