1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
Table of Contents
TK-80
4-1. Procedure
1) Press [POWER] while holding [MENU] and [MODE].
Dealer mode display
Turn [DIAL] or press any key, and enter Memory channel
selector mode.
■ Memory channel selector mode (01)
This mode is for selector memory channels when writing
frequency and other information to memory channels.
Second time: 01 USB only. The others are blank.
1) When [DIAL] is turned, channels, including those not en-
tered in memories, are switched continuously.
01
2) Pressing [DATA] enables the receive frequency write
mode.
■ Receive frequency write mode (00.000.00)
This mode is for writing receive frequencies to memory
channels. The frequency is set in single digits starting from
the 10MHz to the 10Hz digit. The 1Hz digit is defaulted to
"0".
1) Turning the [DIAL] changes the digit to its minimum fre-
quency setting.
2) When the setting of one digit is completed, press [SCAN]
to move to the next digit. Digits are set in order from the
10MHz digit to the 10Hz digit. (When setting the 10Hz
digit, for example, the display shows the previously en-
tered digits: 12.345.56)
3) Pressing [DATA] enables the transmit frequency write
mode.
Note:
• Setting begins from the 10MHz digit when the receive fre-
quency write mode is first enabled.
• The set frequencies are checked to confirm they are
within the specified receive frequency range.
• Setting all digits to "0" initializes the memory channel.
• In the receive frequency write mode, the digit being set
flashes as it displays the frequency.
4
Downloaded from
www.Manualslib.com
REALIGNMENT
( ): Initial value
02
...
79
80
manuals search engine
• If the transmit frequency happens to be the default setting
(00.000.00), when writing the receive frequency is com-
pleted, the receive frequency setting is automatically writ-
ten to the transmit frequency memory channel as well.
• Leading zeros are not suppressed in the frequency dis-
play.
■ Transmit frequency write mode (00.000.00)
This mode is for writing transmit frequencies to the
memory channels. The frequency is set in single digits start-
ing from the 10MHz digit to the 10Hz digit. The 1Hz digit is
defaulted to "0".
1) Turning the [DIAL] changes the digit to its minimum fre-
quency setting.
2) When the setting of one digit is completed, press [SCAN]
to move to the next digit. Digits are set in order from the
10MHz digit to the 10Hz digit.
3) Pressing [DATA] enables the type of emission (MODE)
write mode. (When setting the 10Hz digit, for example,
the display shows the previously entered digits:
12.345.56)
4) When wishing to use the memory channel as a receive-
only channel, set all digits to "0", then press [DATA] to
enable the type of emission (MODE) write mode.
Note:
• Setting begins from the 10MHz digit when the transmit
frequency write mode is first enabled.
• The set frequencies are checked to confirm they are
within the specified transmit frequency range.
• Setting all digits to "0" changes the memory channel to a
receive-only channel.
• In the transmit frequency write mode, the digit being set
flashes as it displays the frequency.
• Leading zeros are not suppressed in the frequency dis-
play.
■ Type of emission (MODE) write mode (USB)
This mode is used to write the type of emission to the
memory channel.
1) Turning the [DIAL] triggers a display that scrolls continu-
ously in the following order:
USB
LSB
2) Pressing [DATA] enables the alphanumeric display data
write mode.
AM
CW
Hide quick links:
Table of Contents
