Table of Contents
GETTING STARTED
1
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is
set to [YES],
5), the display shows: "SEL LANGUAGE" "PRESS"
"VOLUME KNOB"
1
Turn the volume knob to select [ENG] (English) or [TUR] (Turkish),
then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME
KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
Then, the display shows the selected crossover type: "2-WAY X ' OVER"
or "3-WAY X ' OVER"
• To change the crossover type, see "Change the crossover type".
( 5)
2
Set the clock and date
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
4
ENGLISH
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11
Press and hold
to exit.
To return to the previous setting item, press
3
Set the initial settings
1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select an item (see the following table), then
press the knob.
4
3
Repeat step
until the desired item is selected or activated.
5
Press and hold
to exit.
To return to the previous setting item, press
AUDIO CONTROL
SWITCH
(For
PREOUT
(Not applicable if 3-way crossover is selected)
REAR/SUB-W: Selects whether rear speakers or a subwoofer are connected
to the line out terminals on the rear (through an external amplifier).
( 34)
.
.
)
Default: XX
Hide quick links:
Table of Contents
