Audio Jack Board - HP Pavilion 15 Maintenance And Service Manual

NOTE:

The audio jack board spare part kit does not include the audio jack board cable. The audio jack

board cable is available using spare part number L01848-001.

Description

Audio jack board

Before removing the audio jack board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see

5.

Remove the battery (see

Remove the audio jack board:

1.

Release the ZIF connector (1) to which audio jack board cable is connected, and then disconnect the audio

jack board cable from the system board.

2.

Remove the two Phillips M2.0×3.0 screws (2) that secure the audio jack board to the keyboard/top cover.

3.

Remove the audio jack board (3) and cable.

Reverse this procedure to install the audio jack board.

Bottom cover on page

Battery on page

33).

31).

Component replacement procedures

Spare part number

L01847-001

45