Vlan Configuration Commands; Default; Description - HP A5830 Series Command Reference Manual
Layer 2 - lan switching
Hide thumbs
Also See for A5830 Series:
- Configuration manual (280 pages) ,
- Configuration manual (207 pages) ,
- Configuration manual (152 pages)
Table of Contents
VLAN configuration commands
VLAN configuration commands
default
Description
Use the default command to restore the default settings for a VLAN interface.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. You can use the display this command in interface view to check
for these commands, and perform their undo forms or follow the command reference to individually
restore their default settings. If your restoration attempt still fails, follow the error message to resolve the
problem.
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully
aware of the impacts of this command when you perform it on a live network.
Syntax
default
View
VLAN interface view
Default level
2: System level
Parameters
None
Example
# Restore the default settings for VLAN-interface 1.
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Description
Use the description command to change the description of the VLAN or VLAN interface.
Use the undo description command to restore the default.
143
Table of Contents
