Table of Contents
How to use
1) Easy Pairing
•
With the Power off, move the power switch to the 'ON' position
•
The headset will enter Auto-Reconnect mode for 10 seconds (If your headset
has been previously paired to the handset, the headset will automatically
reconnect to the handset, when the HBM-590 is powered on.)
•
If the HBM-590 fails to reconnect to the phone (Speech: Failed to connect to
phone) after 10 seconds, the HBM-590 will automatically enter pairing mode.
•
When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. (Speech: Please Pair Phone Now)
•
Using your handset, find the Bluetooth Menu and "search for" or "add" new devices.
•
Select "LG HBM-590" from the list of devices and pair it with your handset.
•
If you are asked for the Pass/PIN code during the pairing procedure, please
enter "0000" (4 Zeros).
•
Once pairing has completed successfully, you will hear a beep.
(Speech: Paired to phone successfully)
•
After pairing successfully, be sure to "Connect" to the LG HBM-590.
(Speech: Connected to Phone) You will hear a short beep.
•
Some handsets might ask for permission to access the phone's contact list. If
you receive a message from your handset, please select "OK" or "Allow access"
•
If you want to pair with a different device in the future, the headset must be placed
in Pairing Mode.
•
If the headset is in Pairing mode for three minutes without being connected to a
handset, the HBM-590 will automatically turn off.
2) Manual Pairing
•
With the Power off, press and hold the CALL button and move the power switch
to the 'ON' position at the same time for 4 seconds.
•
When the headset enters Pairing Mode, the LED indicator will show a solid
blue light. (Speech: Please pair phone now)
•
Using your handset, find the Bluetooth Menu and "search for" or "add" new devices.
•
Select "LG HBM-590" from the list of devices and pair it with your handset.
•
If you are asked for the Pass/Pin code during the pairing procedure, please
enter "0000" (4 Zeros)
•
Once pairing has completed successfully, you will hear a beep.
(Speech: Paired to phone successfully)
•
After pairing successfully, be sure to 'connect' to the LG HBM-590.
(Speech: Connected to Phone) You will hear a short beep.
•
Some handsets might ask for permission to access the phone's contact list. If
you receive a message from your handset, please select "OK" or "Allow access"
•
If you want to pair with a different device in the future, the headset must be
placed in Pairing Mode.
6
•
If the headset is in Pairing mode for three minutes without being connected to a
handset, the HBM-590 will automatically turn off.
Auto Reconnect
- When the HBM-590 turns off (accidentally or intentionally) while connected to a
handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBM- 590 is turned back on.(as long as
both devices are within the required range of 33ft. or 10m).
[ Out of range ]
- When the HBM - 590 and your handset are separated by a distance of 33 feet
(10 meters) or more, the headset and handset will disconnect, and you will hear
a beep(Speech: Out of range) When the handset and HBM - 590 are brought
back within the required distance, the HBM - 590 will automatically reconnect
with the handset, and you will hear a beep. (Speech: Connected to Phone)
- If the headset and handset do not automatically reconnect when they are back
within the required range, briefly press the CALL button on the HBM-590 to
reconnect manually.
Volume control
- Press the VOLUME UP or VOLUME DOWN button to adjust the Receiver volume.
- There are eight levels of Receiver volume.
Calling
Answering a call
- When there is an incoming call, the headset will ring once, then announce who is
calling. (Speech: Call from [caller name] or [phone number])
- Briefly press the CALL button to answer an incoming call. When the call is
connected, you will hear a beep.
Making a call
- If you make a call from the handset, the call will (subject to phone settings)
automatically transfer to the headset. If the call is not automatically transferred,
you can manually transfer the call by briefly pressing the CALL button on the
HBM - 590 (headset and handset must be paired).
Voice dialing*
- Briefly press the CALL button to activate "Voice Command". You will get the best
results if you record the voice dialing tag through your headset.
NOTE: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
How to use
7
Table of Contents
