Table of Contents
1. BEFORE OPERATION
1.4
How to Read Model Numbers
1.4.1
Model Number of Servomotor
1. BL series
P10...P1 series
P20...P2 series
P30...P3 series
P50...P5 series
P60...P6 series
P80...P8 series
2. Indicates the BL motor
3. Indicates flange square size
03...35 mm
06...60 mm
13...130 mm
22...220 mm
4. Indicates rated output
○○○ = ○○○ × 10 w
5. Maximum revolution speed
S...1000 min
R...2500 min
P...4500 min
6. Equipping of holding brake
X...Not equipped.
7. Type of detector
S... Wiring-saved incremental encoder
J... Absolute encoder with the motor flange square of 60 mm or less;
Request signal-unavailable type.
A... Absolute encoder with the motor flange square of 76 mm or more;
Request signal-unavailable type.
N... ABS-RII; Super-capacitor-unavailable, request signal-available type.
V... ABS-RII; Super-capacitor-built-in, request signal-available type.
8. Specification identification
00...
Standard motor
The design revision order is indicated by an alphabet at the end of Lot No. on the
nameplate.
04...40 or 42 mm 05...54 mm
07...76 mm
15...150 mm
− 1
− 1
M...1500 min
− 1
− 1
H...3000 min
− 1
B...Equipped. (90V)
○○○
B
08...80 or 86 mm
18...180 mm
− 1
B...2000 min
− 1
D...4500 min
C...Equipped. (24V)
1－6
○○
○○○ △ □ ◇
▽▽
Hide quick links:
Table of Contents
Troubleshooting
