Table of Contents
Button Functions
VCR, DVD, TV, CBL/SAT
POWER Turns
Selects product to be operated.
product On or Off.
Mode Indicator Lights when
mode buttons are pressed.
MENU Access the
Menu functions of
the device you are
controlling.
SETUP
For setup.
NUMBERS
Enter numbers for direct
channel selection. Some
products require Enter to
be pressed after channel
selection.
ENTER
Used after direct
channel number
entry to immediately
change to the
selected channel.
VOLUME UP/
DOWN Changes
the volume level
of the product,
normally the TV.
SCAN buttons
select the next or
previous Freewire
Camera.
MOODS 1 and 2
ON and OFF
Three ON/OFF buttons
select the
These three buttons turn on and off
previously setup
Freewire Modules set to the room
Freewire moods
color numbers show through the
opening on the lid below. In this
example 11, 12, and 13.
Button Functions, cont.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
RECORD, PLAY, STOP,
REW, FF, PAUSE VCR
control buttons operate
your VCR even when the
remote is set to operate
the TV. Also operates
DVD Scan -/+.
EXIT Used to exit
menu functions.
INFO displays/selects
on-screen channel
information, etc.
TV/VCR/INPUT
For some TVs, press
repeatedly to select
from available viewing
sources (antenna,
cable box, VCR, etc.).
CHANNEL UP/
DOWN Changes
the channels.
MUTE Turns off
the TV sound
while the
picture remains.
LAST
Returns to the
previously
selected channel.
Room ON/OFF buttons
These two buttons turn on and off
all three Freewire Modules set to the
room color numbers shown through
the opening on the lid below. Lid
shown here removed.
Page 4, 5
Table of Contents
