Table of Contents
Installation and Connection
Installation and Connection
Installing the unit
Installing the unit using the mounting
bracket removed from the car
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
Installing the unit using the mounting
sleeve
(Only for KW-V240BT Region 4)
]
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
Installing the trim plate
(Only for KW-V240BT Region 4)
π / [
Car bracket
Removing the unit
(Only for KW-V240BT Region 4)
1
Engage the catch pins on the extraction
keys (
\
) and remove the two locks on the
lower part of the trim plate (
2
'
3
'
).
Catch
Lock
\
Remove from the upper two catches of
the trim plate (
'
).
The frame can be removed from the top side in the
same manner.
Remove the unit by inserting the two
extraction keys (
\
), then pulling them as
illustrated.
\
Be careful to avoid injury from the catch pins on
the extraction key.
ENGLISH
53
- Quick Links:
- How to Reset Your Unit
- Wiring Connection
Hide quick links:
Table of Contents
