Configuring Bgp Route Dampening - HP 5500 EI series Configuration Manual
Hide thumbs
Also See for 5500 EI series:
- Configuration manual (238 pages) ,
- Installation manual (69 pages) ,
- Specifications (47 pages)
Table of Contents
Step
3.
Enter BGP IPv6 unicast
address family view or
BGP-VPN IPv6 unicast
address family view.
4.
Configure BGP route
reception filtering policies.
Configuring BGP route dampening
Route dampening enables BGP to not select unstable routes as optimal routes.
To configure BGP route dampening (IPv4):
Step
1.
Enter system view.
2.
Enter BGP view or BGP-VPN
instance view.
3.
Enter BGP IPv4 unicast
address family view or
BGP-VPN IPv4 unicast
address family view.
Command
address-family ipv6 [ unicast ]
•
Reference ACL or IPv6 prefix list to
filter BGP routes received from all
peers:
filter-policy { acl6-number |
prefix-list ipv6-prefix-name } import
•
Reference a routing policy to filter
BGP routes received from a peer or
peer group:
peer { group-name | ipv6-address }
route-policy route-policy-name
import
•
Reference an ACL to filter BGP routes
received from a peer or peer group:
peer { group-name | ipv6-address }
filter-policy acl6-number import
•
Reference an AS path list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ipv6-address }
as-path-acl as-path-acl-number
import
•
Reference an IPv6 prefix list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ipv6-address }
prefix-list ipv6-prefix-name import
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a.
bgp as-number
b.
ip vpn-instance
vpn-instance-name
address-family ipv4 [ unicast ]
208
Remarks
N/A
Use at least one method.
By default, no route reception
filtering is configured.
Remarks
N/A
N/A
N/A
Table of Contents
Troubleshooting
