Table of Contents
Section
03
Operating this unit
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1
Touch NEXT on the initial menu.
2
Touch DIGITAL ATT to switch the digital
attenuator setting.
Touch DIGITAL ATT repeatedly until the de-
sired setting appears in the display.
! HIGH – High quality sound
! LOW – Minimize distortion sound
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1
Touch NEXT on the initial menu.
2
Touch AUDIO RESET.
3
Touch RESET.
4
Touch RESET again to reset audio func-
tions.
# To cancel resetting the audio functions, touch
CANCEL.
44
En
Other Functions
Introduction of system
adjustments
1 System menu display
Shows the system function names.
1
Touch A.MENU and then touch
SYSTEM MENU to display the system func-
tion names.
The system function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
2
Touch ESC to return to the display of
each source.
# To return to the previous display, touch BACK.
Changing the wide screen mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 one.
1
Touch WIDE MODE on the system
menu.
2
Touch the desired wide mode setting.
3
Touch ESC to hide the touch panel keys.
FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, giving you a 4:3 TV picture (normal pic-
ture) without any omissions.
1
Hide quick links:
Table of Contents
