Quick Links
See also:
User Manual
1
Hardware Specifications
WS322 300Mbps Mini
Wireless Router
Quick Start Guide
Status indicator
WPS button
Figures in this guide are provided for your reference only. The
actual product may vary.
Huawei Technologies Co., Ltd.
Procedure on Computers Running Windows XP
Procedure on Computers Running Windows 7
Double-click Internet Protocol Version 4 (TCP/IPv4).
3.
Choose Start > Control Panel >
1.
Network and Internet
Connections.
4.
Click Use the following IP address and Use the following DNS
server addresses. Set IP address to 192.168.33.x (any integer
ranging from 2 to 252), Subnet mask to 255.255.255.0, and Preferred
DNS server to 192.168.33.1. Then click OK.
Item
Status
Description
Off
The WS322 is powered off or faulty.
Blinking red: the WS322 is powering on.
Signal strength indicator
Blinking
Status
Blinking blue: the WS322 is connecting to the network.
indicator
Steady red: the WS322 is working properly but is not
Steady
Reset button
connected to any network.
on
Steady blue: the WS322 is connected to the network.
Off
The WS322 is not connected to any network.
Blinking The WS322 is changing its working mode.
Signal
The WS322 is connected to a network. The lightened
strength
Steady
indicator bars indicates the network signal strength. Three
indicator
on
bars mean the network signals are strong, while one bar
means the network signals are weak.
WPS
Quickly sets up a wireless connection or changes WS322's
/
button
working mode.
Restores the WS322 to its factory settings. When the
Reset
WS322 is powered on, use a sharp object to push and hold
/
button
this button for 1 second or more to restore the WS322 to its
default settings.
3.
Double-click Internet Protocol (TCP/IP).
Choose Network Connections
2.
> Local Area Connection.
Right-click Local Area
Connection,and choose
Properties.
Click Use the following IP address and Use the following DNS
4.
server addresses. Set IP address to 192.168.33.x (any integer
ranging from 2 to 252), Subnet mask to 255.255.255.0, and Preferred
DNS server to 192.168.33.1, and click OK.
2
Working Modes
WiFi Router Mode That Helps You Establish a Private Access Point
WiFi Repeater Mode That Expands the WLAN Coverage
In this mode, the WS322 is connected to the Internet through its Ethernet
In this mode, the WS322 is wirelessly connected to the Internet, providing
port and works as a WiFi access point in a home, providing Internet access
Internet access for wireless clients, such as phones and computers.
for wireless clients, such as phones and computers.
This mode is used to expand the existing access point or router's signal
To set up a wireless connection, press and hold the WS322's WPS button
coverage.
more than 1 second and less than 2 seconds, and press the wireless
To set up a wireless connection, press and hold the WS322's WPS button
client's WPS button within 2 minutes. When the connection is set up, the
more than 1 second and less than 2 seconds, and press the access point
WS322's status indicator turns from blinking to steady on.
device's WPS button within 2 minutes. When the connection is set up, the
To change WS322 into WiFi Router mode, press and hold the WS322's
WS322's status indicator turns from blinking to steady on.
WPS button more than 4 second and less than 6 seconds. Then release the
To change WS322 into WiFi Repeater mode, press and hold the WS322's
WPS button when you see a signal strength indicator blinking. The WS322
WPS button more than 6 second and less than 8 seconds. Then release
will restart and change into WiFi Router mode.
the WPS button when you see two signal strength indicators blinking. The
WS322 will restart and change into WiFi Repeater mode.
4
Setting Up a Wireless Connection
Procedure on Computers Running Windows 7
1.
Choose Start > Control Panel >
2.
From the wireless network list,
3.
Enter the key, and click OK.
Network and Internet >
choose the WS322's SSID, and
Network and Sharing Center >
click Connect.
Change adapter settings.
Right-click Local Area
Connection, and choose
Connect/Disconnect.
For the WS322's default SSID and key, see the label on its casing.
WiFi Client Mode That Provides Internet Access for Devices
Without the WLAN Function
In this mode, the WS322 is connected to a client, such as set-top box (STB)
or computer, through its Ethernet port, providing the client with wireless
access to a wireless access point or router.
To set up a wireless connection, press and hold the WS322's WPS button
more than 1 second and less than 2 seconds, and press the access point
device's WPS button within 2 minutes. When the connection is set up, the
WS322's status indicator turns from blinking to steady on.
To change WS322 into WiFi Client mode, press and hold the WS322's WPS
button more than 8 second and less than 10 seconds. Then release the
WPS button when you see three signal strength indicators blinking. The
WS322 will restart and change into WiFi Client mode.
Procedure on Computers Running Windows XP
4.
After the key is verified,
1.
Choose Start > Control Panel >
2.
From the wireless network list,
Connected is displayed on the
Network and Internet
choose the WS322's SSID, and
right of the network icon,
Connections > Network
click Connect.
indicating that the WS322 and
Connections. Right-click
computer are wirelessly
Wireless Network Connection,
connected.
and choose View Available
Wireless Networks.
3
Setting the Computer's IP Address
Procedure on Computers Running Windows 7
Choose Start > Control Panel >
Choose Change adapter
1.
2.
Network and Internet >
settings > Local Area
Network and Sharing Center.
Connection. Right-click Local
Area Connection, and choose
Properties.
3.
Enter the key and click OK.
After the key is verified, Connected is displayed on the right of the
4.
network icon, indicating that a wireless connection has been set up
between the computer and WS322.
Issue: 96721726 _01
Related Manuals for Huawei WS322
Summary of Contents for Huawei WS322
- Page 1 WiFi access point in a home, providing Internet access Internet access for wireless clients, such as phones and computers. In this mode, the WS322 is connected to a client, such as set-top box (STB) Network and Internet >...
- Page 2 > settings, and ensure that none of the check boxes how to set the IP address of the device connecting to the WS322's WLAN. illustrate how to connect a device to the WS322's WLAN. Place the WS323 close to the computer, and make sure that there are...
- Page 3 1999/5/EY olennaisten vaatimusten ja direktiivin Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Slovenščina: Huawei Technologies Co., Ltd. izjavlja, da je ta naprava v Maintenance Precautions for Using Wireless Devices Longgang District, Shenzhen, P.
- Page 4 Huawei Technologies Co., Ltd reserves the right to change or modify any communications. However, there is no guarantee that interference will Customers shall comply with all applicable export or import laws and Ltd.