Preparations - Sony MVS-8000X User Manual
Multi-format production switcher processor with ccp-8000 series center control panel volume 1
Hide thumbs
Also See for MVS-8000X:
- User manual (1164 pages) ,
- Installation manual (58 pages) ,
- Operation manual (26 pages)
Table of Contents
Preparations
The color corrector enables video signal color correction (black balance/white
balance adjustment, gamma correction, knee correction, etc.).
Notes
To use the color corrector, the BZS-8420X Color Corrector Software. To use
the software, you are required to input an install key.
For the method of inputting an install key, see "Installation and Device Setup
(Install/Unit Config Menu)" in Chapter 18 (Volume 3).
Restrictions on color corrector and M/E combination
Signal
When the color corrector output is selected
format
3M/E system
Other
–
than
720P
720P
Re-entry signal
selection on a
key bus or the
utility 1 bus
cannot be
performed over a
cascade of two
or more M/E
blocks.
(Restriction 2)
Example of restriction 2: When M/E-1 is selected on the M/E-2 background
Assigning the color corrector input buses to AUX delegation
buttons
There are two inputs for capturing material to the color corrector: the CCR1
bus and the CCR2 bus.
For details of the input assignment operation, see "Auxiliary Bus Control
Block Settings (Aux Assign Menu)" in Chapter 19 (Volume 3).
454
Preparations
4M/E system/5M/E system
Re-entry signal selection on a key
bus or the utility 1 bus cannot be
performed over a cascade of two or
more M/E blocks. (Restriction 2)
Re-entry signal selection on a key
bus or the utility 1 bus cannot be
performed. (Restriction 1)
A bus (or background B bus, key bus, or utility 1 or 2 bus), then M/E-2
cannot be selected on the M/E-3 key bus or the utility 1 bus.
When the color corrector output
is not selected
4M/E system/5M/E system
–
Re-entry signal selection on a key
bus or the utility 1 bus cannot be
performed over a cascade of two or
more M/E blocks. (Restriction 2)
Table of Contents
