Table of Contents
4. Disassembly/Assembly
2. Remove the Deck Separation Roller.
• 1 Claw
NOTE:
How to install the Deck Separation Roller
Be sure to align the groove [2] of the Torque Limiter[1] with the spring pin [3] to install the roller.
[3]
[2]
[1]
Be sure to align the groove [2] of the Deck Separation Roller [1] with the protrusion [4] of the Torque Limiter[3] to install the roller.
[1]
[2]
[4]
[3]
Be sure to insert the Deck Separation Roller [2] until the claw [1] is hooked.
1x
[1]
[2]
52
Table of Contents
