System Bios And Set-Up; Entering Set-Up; Control Keys - Mitsubishi Electric Apricot LS Owner's Handbook Manual
Hide thumbs
Also See for Apricot LS:
- Owner's handbook manual (81 pages) ,
- Owner's handbook manual (72 pages) ,
- Installation manual (30 pages)
Table of Contents
C
SYSTEM BIOS AND SET-UP
When the system is switched on, the power on self test (POST) does its
job depending upon the information it finds in the BIOS and sets up
the computer to boot into operation. You can access the BIOS and
check or alter the configuration via its set-up utility.
Caution
The BIOS has been set in the factory for the optimum system performance and
operation. It is not advisable to alter any settings under normal use.
Entering Set-up
During, or just after, the POST, a small box appears in the top right
corner of the screen.
It looks like this:
While this is on the screen press
seconds you will be presented with the BIOS set-up screen. You
cannot enter this set-up utility at any other time or by any other
method.
Control keys
F1
Esc
Help on the highlighted topic, pressing it a second time
transfers you to the general help pages.
Exit either the set-up, or go back a page if in a sub-menu.
T E C H N I C A L I N F O R M A T I O N
~~~~
~~~~
~~~~
F1
on the keyboard, and in a few
~~~
~~~
~~~
C/1
Table of Contents
Troubleshooting
