Table of Contents
Installing and removing the power supply
Installing and removing the battery
Installation
1
Insert the battery until it clicks into place.
Connecting and disconnecting the power cord
Installation
1
Connect the DC cord to the AC adapter.
2
Plug the AC power supply cord into the
power outlet.
3
Slide the DC cord's battery connector to
the direction of the arrow until it clicks into
place.
DC cord's battery
connector
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
16
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
While pressing the battery release button,
raise up the battery to remove it.
•
Mode lamp
Battery release button
2
Slide the DC cord's battery connector to
the direction of the arrow while pressing
the battery release button.
Battery release button
3
Disconnect the AC power supply cord from
the power outlet.
CAUTION:
This apparatus can be operated at a voltage in
Voltages other than 120 V are not intended for
U.S.A. and Canada.
Operation at a voltage other than 120 V AC may
contact either a local or foreign Panasonic
selecting an alternate AC plug.
Table of Contents
