Preparations; Connections; Power; Connecting The Wireless Subwoofer - Philips Docking Entertainment System DC912 User Manual
Docking entertainment system
Hide thumbs
Also See for Docking Entertainment System DC912:
- Specifications (2 pages) ,
- Manual (26 pages) ,
- Service manual (24 pages)
Table of Contents
Connections
The type plate is located at the bottom of
the system.
A
Power
●
Before connecting the AC power adaptor to the
wall outlet, ensure that all other connections
have been made.
●
DC jack is located at the bottom panel of the
set.
WARNING!
– Use the supplied AC power adaptor only!
Using any other power connection device
may damage your main set!
– For optimal performance, use only the
original AC power adaptor.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B
Connecting the wireless subwoofer
1
Place the subwoofer on the floor near an AC
outlet.
2
Connect the power cord of the subwoofer to
the AC outlet.
➜
The LED indicator on the subwoofer's back
panel light up blue.
3
Power on both the main set and subwoofer.
➜
Wireless connection will set up automatically.
➜
"NOT PAIR" will be displayed at inverals of
10 seconds if wireless connection fails to set up.
In case the wireless connection fails due
to conflict or strong interference etc.,
you may need the following procedures
for manual pairing:
1
In standby mode, press and hold 2; on the set
for three seconds to activate signal transmitting.
➜
"PAIR" flashes on the display screen.
Preparations
9
Hide quick links:
Table of Contents
Troubleshooting
