LG MUSIC FLOW H5 Simple Manual page 28

28

Troubleshooting

2. If you change the location of the speaker that is in use,

2-1. If the changed location is too far from the home router,

it may not be connected. Place and use it at a location

that is close enough to router.

2-2. Connect the speaker with a LAN cable, and for

additionally installed speakers, if they are not close

enough to the speaker connected with a LAN cable,

additionally install Bridge or another speaker in the

middle location between the speaker connected

with LAN cable and the speaker with sound being

disconnected.

There are times that speaker disappears from

the application

1. If the speaker blinking lamp is not blinking, and stays

4

as white: Even after the speaker power off and on, if the

problem continues, in this case you have to reset the speaker

(To reset, press and hold the "ADD" button for 8 seconds until

you hear one beep. ) then you need to register again. Carry

out speaker installation or additional procedures.

2. If the speaker blinking lamp blinks white - network signal is

unstable. Wait for a while, or move the speaker to another

location closer to another speaker or router.

3. Press menu key or menu at the top right side of Home

screen to end Music Flow Player app and run again.

Music sound breaks and unstable MUSICflow

system

1. If speaker with breaking sound is connected through

wireless connection mode,

y If the distance between the speaker and home router

is not close enough, the corresponding condition may

occur. Move the speaker closer to the home router and

try again.