Cisco TelePresence MX800 Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Conference System
  5. Telepresence MX800
  6. Installation manual

Cisco TelePresence MX800 Installation Manual

Dual monitor with dual camera
Hide thumbs Also See for TelePresence MX800:
Table of Contents

Quick Links

See also: Administrator's Manual , Reference Manual

Installation guide

for Cisco TelePresence MX800 Dual Monitor with Dual Camera
on a free standing floor stand or a floor stand secured to the wall
78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
http://www.cisco.com/go/mx-docs
Table of Contents
loading

Related Manuals for Cisco TelePresence MX800

Summary of Contents for Cisco TelePresence MX800

  • Page 1: Installation Guide

    Installation guide for Cisco TelePresence MX800 Dual Monitor with Dual Camera on a free standing floor stand or a floor stand secured to the wall 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. http://www.cisco.com/go/mx-docs...
  • Page 2 Other services: Visit the Cisco web site to find user guides and compliance and safety information for the video system, http://www.cisco.com/go/mx-docs Floor stand secured to the wall 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 2...
  • Page 3 Lay the box marked with A and B+C+E+K flat on the floor. Remove the lid. Boxes B, C, E and K are inside. F-J+L+M B+C+E+K A 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 3...
  • Page 4 Tool: Allen key, 2.5 mm PT4x10, pan Tool: Torx T20 Tools Allen key, 4 mm Allen key, 2.5 mm Torx T20 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 4...
  • Page 5 Remove covers from floor stand parts Set aside the covers. They will be replaced when the system is fully assembled and tested (step 20). Front 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 5...
  • Page 6 Fasten the upper and lower center parts simultaneously, first one side; then the other side. Six screws from the back and four from the top. 8 × M6x12, countersunk 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 6...
  • Page 7 Installation guide for Cisco TelePresence MX800 Dual - Floor stand Fasten center bracket 2 × M6x12, pan Front 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 7...
  • Page 8 Mount the feet to the floor stand to allow it to be free standing. Option B (secured to the wall) is described on the next page. 4 × M6x35, countersunk Front 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 8...
  • Page 9 Front Fasten the floor stand to the wall brackets with the four screws (provided). Mounting positions, side view 4 × M6x12, pan 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 9...
  • Page 10 Left monitor, rear Right monitor, rear 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 10...
  • Page 11 Tighten the wing nuts on both sides. They are accessed from the sides of the monitor. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 11...
  • Page 12 4 × M6x12, countersunk monitor in step 9. Enter four screws from Rear view front and four screws from underneath. Then, tighten all screws. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 12...
  • Page 13 Do not let go of the monitor before it is securely placed on the floor stand. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 13...
  • Page 14 The socket must be reached from below. Make sure that the power switch next to the socket is in its ON position. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 14...
  • Page 15 Unscrew the screws (4 × M4x8) Unscrew the screws (2 × M4x8) and remove the support handles. and remove the brackets that the support handles were fastened to. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 15...
  • Page 16 Place the joining bracket in the channel. Make sure it aligns with the channel at the top. Push down the lever to a 5 × M6x12, pan horizontal position. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 16...
  • Page 17 Place the back cover in position at the top, then lower it toward the system. The cover snaps to magnets. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 17...
  • Page 18 2 × Loudspeaker cables HDMI (step 16) 4 - 5 (step 17) 5 × Loudspeaker cables 2 - 6 (step 17). Cable 1 is not used 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 18...
  • Page 19 Connect cables to right monitor and PoE injector SWITCH Ethernet Power over Ethernet injector COLOR HDMI DO NOT CALIBRATION REMOVE HDMI USB (type B) Right monitor connector panel 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 19...
  • Page 20 Similarly, fasten the left camera support bracket to the upper left corner of the left camera and to the top profile. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 20...
  • Page 21 The cover snaps to magnets. 1 × Speaker clip Fasten the speaker clip for the center loudspeaker. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 21...
  • Page 22 Camera connector panel (left) DAISY VISCA CHAIN HDMI Camera connector panels Connect an HDMI cable in the middle and an HDMI cable on the right side. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 22...
  • Page 23 Enter the loudspeaker onto the speaker clip. Fasten with one screw. Make sure that no cables are pinched. 8 × PT4x10 (one for each loudspeaker) 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 23...
  • Page 24 Codec connector panel CAT 5e, shielded Ethernet cable, 5 m. Two presentation cables are provided: HDMI ↔ HDMI; and DVI/Euroblock ↔ VGA/mini jack. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 24...
  • Page 25 The Ethernet socket is behind the lid at the rear of Touch 10. Use one of the provided PoE rated CAT 5e Ethernet cables, 12.5 m or 4 m, flat. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 25...
  • Page 26 Getting Started articles for room systems. Other services: For further information on set-up and configuration, download the Getting Started Guide from the Cisco web site, http://www.cisco.com/go/mx-docs 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 26...
  • Page 27 Installation guide for Cisco TelePresence MX800 Dual - Floor stand Mount covers The top cover is fastened by clips. The other covers snap to magnets. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 27...
  • Page 28 Installation guide for Cisco TelePresence MX800 Dual - Floor stand Mount textile grilles L, M Use the provided gloves when handling the textile grilles. The grilles snap to magnets. 78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved. Page 28...
  • Page 29 For a list of offices, visit the Cisco website at http://www.cisco.com/go/offices Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.

Table of Contents