Related Manuals for LG XID-300
Summary of Contents for LG XID-300
- Page 1 Version Eng-0.01 Copyright ⓒ LG CNS Copyright 11 LG CNS ⓒ...
-
Page 3: Table Of Contents
Safezone XID-300 < Contents > 1. Before Use ..............................3 1.1. Safety Precautions............................... 3 1.2. Terminal Description ..............................5 1.3. Screen Description (During Operation)......................5 1.3.1 Icons Shown During Operation ......................... 6 1.3.2 Message Shown During Operation ......................6 1.3.3 LED Signal Shown During Operation ...................... 7 1.3.4 Keys Used During Operation ........................ -
Page 4: Before Use
Safezone XID-300 1. Before Use 1.1. Safety Precautions Warning Do not handle the unit with wet hands and do not Do not place a fire allow liquid to flow into, or source near the unit. on, it. -> It may cause a fire. - Page 5 Safezone XID-300 Avoid using insecticides Avoid getting the or flammable sprays fingerprint input area dirty. near the unit. ->It may prevent the unit -> It may result in the from recognising the deformation or change fingerprint. the colour of the unit.
-
Page 6: Terminal Description
Safezone XID-300 1.2. Terminal Description State Display LED Card Input Area Touch Key Normally, the figures are invisible as the LED is off. LED turns on and the figures illuminate when the user lightly 1.3. Screen Description (During Operation) Door State... -
Page 7: Icons Shown During Operation
Safezone XID-300 1.3.1 Icons Shown During Operation Door Status : Door status is unknown. : Door is closed. : Door is open. Connection Server : LAN cable is connected, but not yet to the server. : Connected with the server. -
Page 8: Led Signal Shown During Operation
Safezone XID-300 When authentication has failed. - As card is expired. When the lid of the terminal is opened 1.3.3 LED Signal Shown During Operation Green When authentication has failed, when the lid of the terminal is opened When authentication is successful. -
Page 9: Buzzer Sounds Used During Operation
Safezone XID-300 When authentication has failed. This card is not registered. Please try again. When terminal is Initialized Terminal is initializing 1.3.6 Buzzer Sounds Used During Operation Beep When the key is pressed or card is read Be peep when the lid of the terminal is opened 1.4. -
Page 10: Product Introduction
Safezone XID-300 2. Product Introduction 2.1. Features • Slim and polished design - Easy to install as it is designed as a standalone type; Slim and elegant design using Colour LCD and Touch Keys • Change the LCD background image and voice using USB. -
Page 11: Block Diagram
Safezone XID-300 2.2. Block diagram Copyright 11 LG CNS ⓒ... -
Page 12: Specification
Safezone XID-300 2.3. Specification Item Specification Remarks 32Bit RISC CPU(400MHz) 2.8” TFT Color (320*2400 Touch Key 15Key (0~9, F1~F4,Enter) Memory 32M SDRAM 16M NOR FLASH 128M NAND FLASH Temperature/ -20 ~ 50 / Humidity Lower than 90% RH AC / DC Adapter... -
Page 13: Environment Settings
Safezone XID-300 3. Environment Settings 3.1. Enter the Menu. When you put [ENT] for 3seconds, LED of keypad is off and then on with Beep sound. After taking off your finger, the following screen appears. The initial password is 2345. -
Page 14: Menu Configuration
Safezone XID-300 3.2. Menu Configuration 1. Network 1. Terminal IP Terminal IP Gateway Subnet mask 2. Server IP Server IP Server PORT 2. System 1. Language Korean English 2. Volume Control 1. Voice Volume 2. Beeper Volume 3. Initialize 1. Setting Initialization 2. -
Page 15: Network
Safezone XID-300 3.2.1 Network - If pressing [1] at Admin main menu, the following screen appears 3.2.1.1 Terminal IP and Server IP setting - If you want to change it, press [1] and select <1. Terminal IP>. When you set IP, [F1] is for “.”(dot) The user can exit to the parent menu using the [ENT~] key to apply the changed values. -
Page 16: System Setting
Safezone XID-300 3.3.1 System Setting - Put [2] at a main menu, and the following screen appears 3.3.1.1 Language - Selete <1. Language> as putting [1]. You can change what you want as putting [1]or [2]. The user can exit to the parent menu using the [ENT~] key to apply the changed values. Use the [F4 (←)] key to cancel input during setting. -
Page 17: Initialization
Safezone XID-300 3.3.1.3 Initialization - If you want to initialize what you set, press [1]. If you want to delete data, press [2]. If you want to initialize terminal, press [3] - When you press key you want, the following screens appear. If you want to initialize, press [ENT]. -
Page 18: Door Control
Safezone XID-300 - Terminal initialization initializes the whole of terminal. 3.3.1.4 Door Control - Designates the time the door is opened and closed again when authentication is successful. Minimum value is 1 sec and maximum value is 9sec. - <1. Door open> is for that door opens and closes one time. <2. Door open by force> is for that door is always opened. -
Page 19: Background Image
Safezone XID-300 3.3.1.6 Background image - It’s for changing background image. You can select it you want using [1],[2]. The user can exit to the parent menu using the [ENT~] key to apply the changed values. Use the [F4 (←)] key to cancel input during setting. - Page 20 Safezone XID-300 Copyright 11 LG CNS ⓒ...
-
Page 21: Terminal Info
Safezone XID-300 3.5.1 Terminal Info - If you press [4] at Admin main menu, the following screen appears. - You can check terminal version and Door open state from Terminal Info. 3.6.1 Option - You can see the following screen appears if pressing [5]. - Page 22 TDK - EMC Components - Part No: ZCAT1730-0730A Characteristics Page 1 of 1 Close Window EMC Components Clamp Filters (Ferrite Core with Case) Part Number : ZCAT1730-0730A Product Name : Clamp Filters TDK Series Name : ZCAT Series Application : Personal computers, word processors, monitors, hard disk drives, digital telephones, audio devices, electronic musical instruments, video games, copiers and facsimiles.