Table of Contents
Installing your television set
POWER
PROGRAM
MENU
19PFL4322
20PFL4122
15PFL4122
VOLUME
Positioning the television set
Place your TV on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat
source (e.g. lamp, candle, radiator). Do not obstruct
the ventilation grid at the rear.
Connecting the aerials
• Insert the aerial plug into the
rear of the set.
• Connect the power lead to the television and the
mains plug into the wall socket (220-240 V/50 Hz).
For connecting other appliances see page p.13.
Switching on
To switch on the set, press the POWER key. A blue
indicator comes on and the screen lights up. Go
straight to the Quick Installation chapter. If the TV
remains in standby mode (red indicator), press the
P -/+key on the remote control. The indicator will
fl ash when you use the remote control.
Note-Quick installation
ATS (Automatic Tuning System) feature
If the transmitter or cable network sends the
automatic sort signal, the programmes are
numbered correctly. In this case, the installation is
complete. If this is not the case, you can use the
Channel setting menu to number the
programmes correctly.
ACI (Automatic Channel Installation)
feature
If a cable system or a TV channel which broadcasts
ACI is detected, a programme list appears.
Without ACI broadcast, the channels are
numbered according to your language and country
selection. You can use the Channel setting menu
to re-number them.
socket at the
6
Hide quick links:
Table of Contents
