Epson Artisan 810 Service Manual page 183
Color inkjet printer
Hide thumbs
Also See for Artisan 810:
- User manual (76 pages) ,
- Quick manual (64 pages) ,
- Service manual (20 pages)
Table of Contents
Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
4.
Remove the screws (x10) that secure the Upper Housing.
5
4
Upper Housing
1
Panel Unit
Figure 4-164. Removing the Upper Housing (2)
5.
Open the Panel Unit, and lift the Panel Unit until the screw (x1) can be seen
from under the Right Hinge, and then remove the screw (x1).
Figure 4-165. Removing the Upper Housing (3)
DISASSEMBLY/ASSEMBLY
2
3
6
8
7
10
9
C.B.P. 3x10 (6±1Kgfcm)
C.B.A. 3x6 (black) (6±1Kgfcm)
C.B.S. 3x6 (8±1Kgfcm)
C.B.S. 3x8 (black) (8±1Kgfcm)
C.B.P. 3x10 (black) (6±1Kgfcm)
C.B.P. 3x12 (black) (6+1Kgfcm)
Right Hinge
Disassembly/reassembly procedures specific to Artisan 710/PX710W/TX710W
6.
Peel off the double-sided tape A that secures the Panel FFC to the Front
Frame, and lift the Upper Housing until the Panel FFC becomes detached
from the FFC Holder. (See
Fig.
7.
Peel off the double-sided tape B that secures the Panel FFC to the Panel Unit.
(See
Fig.
4-166.)
8.
Disconnect the Panel FFC from the connector on the Panel Unit, and remove
the Upper Housing together with the Panel Unit.
Panel Unit
Double-sided tape B
Double-sided tape A
Upper Housing
FFC Holder
Figure 4-166. Removing the Upper Housing (4)
9.
Remove the Panel Unit from the Upper Housing. (See
(p188).)
Tighten the screws in the order indicated in
Secure the Panel FFC with double-sided tape to the Front
Frame. (See
Fig.
4-166.)
Secure the Panel FFC to the Panel Unit with double-sided tape.
Panel FFC
Figure 4-167. Installing the Upper Housing
Revision G
4-166.)
Front
Frame
Panel FFC
Panel FFC
4.3.2.1 Panel Unit
Fig.
4-164.
Double-sided tape
Confidential
Double
-sided
tape A
183
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
