Product Certifications - Emerson Rosemount 644H Quick Start Manual

September 2016

Rev 1.14

6.1 European Directive Information

A copy of the EU Declaration of Conformity can be found at the end of the Quick Start Guide.

The most recent revision of the EU Declaration of Conformity can be found at

EmersonProcess.com/Rosemount.

6.2 Ordinary Location Certification

As standard, the transmitter has been examined and tested to determine that the design

meets the basic electrical, mechanical, and fire protection requirements by a nationally

recognized test laboratory (NRTL) as accredited by the Federal Occupational Safety and

Health Administration (OSHA).

6.3 Installing Equipment in North America

The US National Electrical Code

use of Division marked equipment in Zones and Zone marked equipment in Divisions.The

markings must be suitable for the area classification, gas, and temperature class.This

information is clearly defined in the respective codes.

USA

E5 USA Explosionproof, Non-Incendive, Dust-Ignitionproof

Certificate: [XP & DIP]: 3006278; [NI]: 3008880 & 3044581

Standards: FM Class 3600: 2011, FM Class 3615: 2006, FM Class 3616: 2011, FM Class

Markings: XP CL I, DIV 1, GP B, C, D; DIP CL II / III, GP E, F, G; (–50 °C ≤ T

I5 USA Intrinsic Safety and Non-Incendive

Certificate: 3008880 [Headmount Fieldbus/PROFIBUS

Standards: FM Class 3600: 2011, FM Class 3610: 2010, FM Class 3611: 2004, FM Class

Markings: IS CL I/II/III, DIV I, GP A, B, C, D, E, F, G; NI CL I, DIV 2, GP A, B, C, D

Special Conditions for Safe Use (X):

1. When no enclosure option is selected, the Rosemount 644 Temperature Transmitter

shall be installed in an enclosure meeting the requirements of ANSI/ISA S82.01 and

S82.03 or other applicable ordinary location standards.

2. Option code K5 is only applicable with Rosemount J5 Universal Head (M20

Rosemount J6 Universal Head (

3. An enclosure option must be selected to maintain a Type 4X rating.

Certificate: 3044581 [Headmount HART]

Standards: FM Class 3600: 2011, FM Class 3610: 2010, FM Class 3611: 2004, FM Class

Markings: [No Enclosure]: IS CL I, DIV I, GP A, B, C, D T4; CL I ZONE 0 AEx ia IIC T4 Ga; NI

®

(NEC) and the Canadian Electrical Code (CEC) permit the

®

3810: 2005, NEMA

-250: 250: 2003, ANSI/IEC 60529: 2004

4X; See I5 description for Non-Incendive markings

3810: 2005, NEMA – 250: 1991

1

3810: 2005, ANSI/NEMA – 250: 1991, ANSI/IEC 60529: 2004; ANSI/ISA

60079-0: 2009; ANSI/ISA 60079-11: 2009

CL I, DIV 2, GP A, B, C, D T5

[With Enclosure]: IS CL I/II/III, DIV 1, GP A, B, C, D, E, F, G; NI CL I, DIV 2, GP A,

B, C, D

/

–14 NPT) enclosure.

2

Quick Start Guide

≤ +85 °C); Type

a

®

®

, Railmount HART

]

1.5) or

11