Power Supply; Remote Control - Philips AZ5140 Service Manual
Vcd mp3 cd soundmachine
Hide thumbs
Also See for AZ5140:
- User manual (22 pages) ,
- Specifications (2 pages) ,
- Quick use manual (1 page)
Table of Contents
9 2;
- to start or interrupt playback.
§
§
for MP3-CD only . . . . to select previous/next
title.
for CD/VCD . . . . . . . . to search backward/
forward track.
/ -
ALBUM+
for MP3-CD only . . . . to select previous / next
album
0 5 / 6 (for CD/VCD/MP3-CD)
- to search back or forward.
! SHUFFLE - When in CD/VCD mode, press to
start or stop shuffle play mode (for VCD, only
available in PBC off mode)
@ REPEAT
for MP3-CD
to repeat a track, or
whole disc.
for CD/VCD . . . . . . . .to repeat a disc track or
the whole disc.
# A - B - to playback a certain scene or passage
repeatedly (for CD/VCD operation only).
$ R/L/ST - to select channel left / channel right /
stereo sound, or to select a language in a
bilingual VCD.
% SLOW - to watch a VCD at a slower speed (for
VCD operation only).
^ PROG
for CD/VCD/MP3-CD
to programme disc
tracks.
& VIEW - to scan through a VCD with 9 pictures
display on TV screen.
* NTSC/PAL - to select the video output for
NTSC or PAL system.
( MIX/SEL - to select disc format (CD / MP3-CD)
in a mixed mode disc.
REMOTE CONTROL
1
2
3
4
5
6
8
7
9
0
!
%
@
^
#
&
*
$
(
POWER SUPPLY
IMPORTANT!
For best CD/MP3-CD/VCD playback, please plug in your set to an AC power supply
•
where convenient.
If operated in DC mode, see below approximate playtime. (Playtime is also varied from
•
different brand batteries) :
Battery type
Alkaline
Zinc Cartonate
The CD part of this system also serves as a Video CD player if you connect it to your
•
TV set.
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or
•
NTSC system of your TV set (exception Multi-system TV).
BATTERIES (NOT SUPPLIED)
Whenever convenient, use the mains supply if you want to conserve battery life. The battery supply
will be switched off when the set is connected to the mains. Make sure you remove the plug from the
set and wall outlet before inserting batteries.
Batteries
1. Open the battery compartment and insert six batteries, type
R14, UM2 or C-cells, (preferably alkaline) with the correct
+
-
polarity as indicated by the "
" and "
" symbols inside the
compartment.
Remote control
1. Open the battery door and insert two batteries,
type AAA, R03 or UM4 (preferably alkaline).
2. Replace the compartment door, making sure the batteries are
firmly and correctly in place.
3. Remove the batteries if they are exhausted or if they will not be used for a long period.
– The incorrect use of batteries can cause electrolyte leakage and will corrode the compartment
or cause the batteries to burst. Therefore:
– Do not mix battery types, e.g. alkaline with zinc carbonate.
– When inserting new batteries, replace all at the same time.
– Remove the batteries if the set is not to be used for a long time.
Note :
– The battery supply is switched off when the set is connected to the mains.
TV screen is disabled during CD / MP3-CD playing if your
powered.
Batteries contain chemical substances, so they should be disposed of properly.
Playtime
approximate 9 hrs
approximate 45 minutes
6 x 1.5V R14/ UM2/ C CELL
AZ5140
is battery
Table of Contents
