Table of Contents
Address Table Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Example
The following example displays the unregistered Multicast configuration.
switchxxxxxx#
show bridge multicast unregistered
Port
Unregistered
-------
-------------
gi11
Forward
gi12
Filter
gi13
Filter
4.32 show ports security
To display the port-lock status, use the show ports security Privileged EXEC mode
command.
Syntax
show ports security [
Parameters
•
interface-id
—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
•
detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display for all interfaces. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the port-lock status of all ports.
switchxxxxxx#
show ports security
interface-id
| detailed]
4
166
Table of Contents
