Table of Contents
1.22 Frame Chassis ASSY
(1) If the bottom plate has not been removed, remove two screws "x" (shown in the illustration in
Section 1.19) from the bottom plate.
(2) Place the machine rightside up.
(3) Cut off the binder that secures harnesses to the frame chassis.
(4) Remove two "a" screws and four "b" screws.
(5) Lift up the frame chassis ASSY.
(6) Remove the video grounding plate.
n n
Reassembling Notes
•
Route the centro harnesses, power supply harnesses, and NCU harness as illustrated above.
The NCU harness and power supply harnesses should be routed so that those harness ends
equipped with a ferrite core come to the outer side as shown above.
IV - 41
Chapters
Table of Contents
Troubleshooting
