Table of Contents
Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
• The network settings printout contains important information about your network. Handle it with care.
1.
Make sure printer is turned on.
2. Load plain paper.
Loading Rolls on the Roll Holder
Loading the Upper Roll on the Printer
If you use sheets, load at least 10 sheets (A4 or Letter-sized).
Loading Sheets in the Printer
3. Flick HOME screen and tap
Menu Operations
The menu screen appears.
4. Tap Test print.
If you specify the administrator password, enter the password.
5. Tap Print LAN details.
The printer starts printing network settings information.
Note
• You can also print the printer's network settings. Tap Device settings on the HOME screen, tap
LAN settings and Confirm LAN settings in this order, and then tap Print LAN details and tap
Yes.
The printed network settings information is as follows: (Some setting values are not displayed depending
on the printer settings.)
Item
LAN Setting
Basic Info
LAN Interface Mode
Link Active
IP Address
Device settings.
Description
Basic setting information
IPv4 setting information (Wired LAN)
Current interface
Operation status
IPv4 IP address
232
Setting
-
-
Wired/Wireless/AP Mode/WFD
Mode
Inactive/Active
XXX.XXX.XXX.XXX
- Quick Links:
- List of Support Code for Error
Hide quick links:
Table of Contents
Troubleshooting
