Main Parameter 05 Trouble shooting Base Stand Assembly Instruction Wall Mounting Installation Guidelines Trouble shooting Front Control Panel 06 Specification Rear/Side Sockets Connecting to your Haier TV Specification Common Interface 03 Remote Control Remote Control Teletext 04 Operation First Time Installation...
01 Safety warnings Thanks for buying this 55" LED LCD TV. This guide will help you set up and begin using your TV. 55" UHD Digital LED LCD TV Remote control YPbPr connect cable AV connect cable Instruction Manual Quick start guide Stand Now you can get started! IMPORTANT INFORMATION...
Safety notice Warning: To avoid any injury caused by lean of the product, please always ensure the whole product was placed within the table surface in horizontal. CAUTION:When the apparatus was in electrostatic circumstance, it maybe malfunction and need to reset by user. EN-3...
WARNING AND CAUTIONS Warning Caution High voltages are used in the operation of this Do not trap the power supply cord under the television receiver. Do not remove the cabinet television receiver. back from your set. Refer servicing to qualified service personnel.
Introduction 02 Introdution CAUTION INSTALLATION Never tamper with any components inside the *Locate the TV in the room where light does TV, or any other adjustment controls not not strike the screen directly. described in this manual. All LED-TV's are high *Total darkness or a reflection on the picture voltage electrical equipment.
Introduction Base Stand Assembly Instruction 1. Place the panel side of TV on the platform 2. Fix screws on the bottom of back cover, one and insert the two stands into TV, making the for each side, assembly finished. screws holes of stands correspond to the right holes of TV.
Introduction WALL MOUNTING INSTALLATION GUIDELINES This television can be wall mounted as follows: 1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front of the screen to protect it from any damage. 2.Use the four screws provided to fix the TV onto a wall mounting bracket (not included) via the four VESA standard holes on the back of the television.
Introduction Front control panel 1: Remote control sensor. 2: Indicator LED: RED STANDBY. 3: Key board ≤ 8m Bottom Navigation menu TV Status Middle key Pull Up/Down Pull Left/Right On analog and digital TV, the channel In the absence of audio playback state, No dispaly in TV Open the navigation menu press the volume up / down control.
Introduction Connecting to your Haier TV Green (Y) Blue (Pb/Cb) W White(AUDIO-L ) Red (AUDIO-R, Pr/Cr) Y Yellow (VIDEO) Audio Receiver HDMI1 HDMI2(ARC) HEADPHONE OPTICAL Audio/Video machine with HDMI interfaces COMMON INTERFACE (CI) HDMI3 AV IN YPbPr CVBS, DVD Player or other CVBS, DVD Player or other machine with CVBS/S-Video.
Introduction COMMON INTERFACE The common interface (CI) slot is designed to accept the conditional Access (CA) Module and Smart card in order to view the pay TV programmes and additional services. Contact your Common Interface service provider to get more information about the modules and subscription.
Remote Control 03 Remote Control SCREEN Press to change picture aspect ratio. Press to open the on-screen menu.In teletext mode,press to open the INDEX page. Press to navigate the on-screen menu. Press to confirm a selection. Press to return to the previous screen.In teletext mode,press to enter mix mode.
Remote Control TELETEXT Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.) Press: You will obtain : This is used to call or exit teletext modes.
Operation 04 OPERATION First Time Installation Please according to the Text Tip to First Time Setup. Main language support only English/Hindi. No video calling feature support in this unit. HOME Set the initial password for your TV. If the country you selected is France, the password cannot be set as 0000.
Operation Contrast: Adjust image contrast. TV SETTINGS Brightness: Adjust image brightness . Colour: Adjust image color density. Sharpness: Adjust the image edge sharpness. Colour Temperature Adjust the overall color of the image. ▼ ▲ Press 【 】/【 】 to select Colour Temperature 【...
Operation Balance Adjust the left and right channel output balance. IP/Wifi Configuration Network Info ▼ ▲ Press button to select Balance , then 【 】/【 】 press【◄】/【►】 button to adjust. Auto Volume Level ▼ ▲ Press button to select Auto Volume Level 【...
Operation PVR File System Recording the selected program. Press ▼ / ▲ button to PVR, then press OK button to confirm. First Time Installation Press ▼ / ▲ button to select First Time Installation, then press Enter button to enter sub-menu. Software Update(USB) Language Reset TV...
Operation Analogue Manual Tuning Schedule List Channel List Digital Manual Tuning TIME Channel Edit ▼ ▲ Press 【 】/【 】 button to select :Off Time/On Time/ Sleep Timer/OSD Timer/Auto Standby/Time Zone. Press 【◄】 【►】to set. New Delhi Signal Information Off Time EN-20...
Operation On Time Channel Lock Sleep Timer ▼ ▲ Press 【 】/【 】 button to select Sleep Timer, Press 【◄】 【►】to select. ptional off, 10min 20min 30min 60min,90min, Parental Guidance 120min,180min,240min). Some program may not be suitable for children, OSD Timer through Parental Guidance set-up ,parents can ▼...
Operation Music Subtitle Language Audio Language Press button Press button to 【SUBTITLE】 【AUDIO】 to enter Subtitle Language enter Audio Language menu. menu. Favorite List Press button to enter 【FAV】 Favorite List Photos Programme Guide Press G 【 UIDE】 button to enter PROGRAMME GUIDE menu. Press it to enter the home page.
Operation Hotel Mode To Enter Hotel Mode Menu Press menu key and follow with key 1,0,0,1 one by one Hotel Mode We can active Hotel Mode by setting this entry. Choose “Hotel Mode” and press ◀/▶to set On or Off. Other options can be set only when we set “On”...
Page 25
Operation CH Table Import We can restore parameter of Channel from USB disk. Insert USB disk,choose “CH Table Import” and press OK to restore. File name is MS6488_HOTELMODE_TABLE.json in USB. CH Table Export We can clone parameter of Channel to USB disk. Insert USB disk,choose “CH Table Export” and press OK to clone.
Trouble Shooting 05 Trouble shooting Trouble phenomenon Symptom Inspection Check Picture Audio antenna position, direction Snow Noise or connection antenna position, direction Ghost Normal audio or connection electronic equipment,car/ Interference Noise motorcycle,fluorescent light Volume(check if mute is Normal Picture activated or if the audio system Mute connections are not correct) Power cord is not inserted...
Page 27
Trouble Shooting Trouble Shooting Most PC's and laptops when connected with a VGA Plug (the My TV does not display the picture blue 15 pin plug on your PC or laptop) require you to press on my laptop / PC when connected. some buttons on your key board to get a picture on a TV or other external display.
Page 28
Trouble Shooting Trouble Shooting Digital TV Problems and possible Solutions. Picture Breaks into Pixels A typical example of a reception problem includes the break up of pictures (pixilation) or the picture freezing, sometimes there are clicking or squeaking sounds or the sound drops out or there is NO reception at all. Your picture may break into pixels due to the digital video signal dropping.