Table of Contents
1
3
1
1
ENGINE DISASSEMBLY
1. Remove:
• Carburetor joint
• Reed valve assemby
• Gasket
2
CRANKCASE RIGHT
1. Remove:
• Crankcase (Right)
NOTE:
• Loosen the bolts starting with the highest
numbered one.
• Loosen each bolt 1/4 turn and remove
them after all bolts are loosened.
Removal steps:
• Attach the Crankcase Separating Tool
NOTE:
Fully tighten the tool holding bolts, but make
sure the tool body is parallel with the case. If
necessary, one screw may be backed out
slightly to evel tool body.
• As pressure is applied alternately tap on
the front engine mounting boss, transmis-
sion shafts and shift cam.
Then remove the crankcase (Right).
NOTE:
Turn the shift cam
the figure so that it doesn't contact the crank-
case when separating the crankcase.
5-13
ENG
Crankcase Separating Tool:
90890-01135
to the position shown in
- Quick Links:
- Engine
Hide quick links:
Chapters
Table of Contents
