Additional Setup Instructions - Paradyne 8540 User Manual
Dslam for 8540 and 8546 dsl cards
Hide thumbs
Also See for 8540:
- Network configuration manual (130 pages) ,
- Installation instructions manual (12 pages)
Table of Contents
Additional Setup Instructions
8000-A2-GB20-20
3. Do one of the following at the (nnn.nnn.nnn.nnn): prompt:
— To accept the subnet mask, press Return.
— To enter a different subnet mask, enter a new subnet mask and press
Return.
The system highlights the OK to restart?: prompt.
4. Type y at the yes/no: prompt to restart the card or n to decline the restart.
If you type y, the card restarts. The system displays the HotWire Chassis
Main Menu.
NOTE:
At this point, the MCC card can accept a Telnet session to be used for
remote configuration.
This section describes additional setup instructions you should perform. On the
Chassis Information screen, you can enter pertinent chassis information, such as
the chassis name, name of person responsible for the system, and physical
location of the chassis.
November 1997
Initial Setup Instructions
3-3
Table of Contents
Troubleshooting
