Specifying Bims Server For Dhcp Clients; Specifying The Configuration File For Dhcp Client Auto-Configuration - HP FlexNetwork MSR2003 Configuration Manual
Flexnetwork msr router series
Hide thumbs
Also See for FlexNetwork MSR2003:
- Configuration manual (350 pages) ,
- Command reference manual (471 pages) ,
- Manual (73 pages)
Table of Contents
To configure WINS servers and NetBIOS node type in a DHCP address pool:
Step
1.
Enter system view.
2.
Create a DHCP address
pool and enter its view.
3.
Specify WINS servers.
4.
Specify the NetBIOS node
type.
Specifying BIMS server for DHCP clients
Perform this task to provide the BIMS server IP address, port number, and shared key for the clients.
The DHCP clients contact the BIMS server to get configuration files and perform software upgrade
and backup.
To configure the BIMS server IP address, port number, and shared key in the DHCP address pool:
Step
1.
Enter system view.
2.
Create a DHCP address pool
and enter its view.
3.
Specify the BIMS server IP
address, port number, and
shared key.
Specifying the configuration file for DHCP client
auto-configuration
Auto-configuration enables a device to obtain a set of configuration settings automatically from
servers when the device starts up without a configuration file. It requires the cooperation of the
DHCP server, HTTP server, DNS server, and TFTP server. For more information about
auto-configuration, see Fundamentals Configuration Guide.
Follow these guidelines to specify the parameters on the DHCP server for configuration file
acquisition:
•
If the configuration file is on a TFTP server, specify the IP address or name of the TFTP server,
and the configuration file name.
•
If the configuration file is on an HTTP server, specify the configuration file URL.
The DHCP client uses the obtained parameters to contact the TFTP server or the HTTP server to get
the configuration file.
To specify the configuration file name in a DHCP address pool:
Step
1.
Enter system view.
Command
system-view
dhcp server ip-pool pool-name
nbns-list ip-address&<1-8>
netbios-type { b-node | h-node |
m-node | p-node }
Command
system-view
dhcp server ip-pool pool-name
bims-server ip ip-address [ port
port-number ] sharekey { cipher |
simple } key
Command
system-view
45
Remarks
N/A
By default, no DHCP address pool
exists.
This step is optional for b-node.
By default, no WINS server is
specified.
By default, no NetBIOS node type
is specified.
Remarks
N/A
By default, no DHCP
address pool exists.
By default, no BIMS server
information is specified.
Remarks
N/A
- Quick Links:
- Configuring Ip Addressing
Hide quick links:
Chapters
Table of Contents
Troubleshooting
